Re: DVD drive not recognized on Intel G965 (2.6.19-rc2)

[Ryan Richter <ryan@tau.solarneutrino.net>]

On Tue, Oct 17, 2006 at 06:04:45PM -0600, Robert Hancock wrote:
> Ryan Richter wrote:
> >On Wed, Oct 18, 2006 at 12:26:25AM +0100, Alan Cox wrote:
> >>Ar Maw, 2006-10-17 am 18:23 -0400, ysgrifennodd Ryan Richter:
> >>>02:00.0 IDE interface: Marvell Technology Group Ltd. Unknown device 6101 
> >>>(rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
> >>>	Subsystem: Marvell Technology Group Ltd. Unknown device 6101
> >>That should work with libata and the newest driver version I posted (the
> >>earlier one won't handle the 6101 just 6145). You need at least rev
> >>0.0.4t.
> >
> >OK, now it's doing a little better.  It seems to recognize the
> >controller and drive, but it's not getting assigned a /dev/[sh]d? device
> >(it doesn't show up in /proc/diskstats, e.g.).  Here's the relevant
> >portion of dmesg:
> >
> >
> >ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
> >PCI: Setting latency timer of device 0000:02:00.0 to 64
> >ata5: PATA max UDMA/100 cmd 0x1018 ctl 0x1026 bmdma 0x1000 irq 17
> >scsi4 : pata_marvell
> >BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 
> >0B:00 0C:01 0D:00 0E:00 0F:00 ata5.00: ATAPI, max UDMA/33
> >ata5.00: applying bridge limits
> >ata5.00: configured for UDMA/33
> >scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H10N  JL10 PQ: 0 ANSI: 
> >5
> >scsi 4:0:0:0: Attached scsi generic sg0 type 5
> 
> Is the sr driver compiled in/loaded? The drive will show up as something 
> like /dev/sr0 or /dev/scd0, depending on distribution.

Heh, I thought that was already in there.  Doh!  It's working fine now,
I can both read and burn CDs.

Thanks,
-ryan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/