Re: How does RAID work with IT8212 RAID PCI card?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ar Maw, 2006-06-13 am 12:01 -0400, ysgrifennodd Lennart Sorensen:
> Congratulations.  You have a fake raid card by the sound of it.  A
> hardware raid card would have only shown one drive, while a fake raid
> card expects the driver to work with the bios to find out the setup (and
> handle booting), and then the driver does all the raid work in software.

The IT8212 is not a fake raid card - it depends on the firmware whether
you see a drive per raid volume (hardware raid mode) or not (ATAPI
capable firmware). We've found the raid firmware seems quite
temperamental and there is little performance gain from raid 1 in
hardware over software so using md or device mapper is recommended for
that reason.


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

[Index of Archives]     [Kernel Newbies]     [Netfilter]     [Bugtraq]     [Photo]     [Stuff]     [Gimp]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Video 4 Linux]     [Linux for the blind]     [Linux Resources]
  Powered by Linux