On 21/01/2006 9:32 p.m., Jeff Garzik wrote:
On the libata side of things, does this patch produce any useful results?
Jeff
------------------------------------------------------------------------
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 46c4cdb..4691f8d 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -4794,7 +4794,14 @@ ata_pci_init_native_mode(struct pci_dev
pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS;
probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4);
ata_std_ports(&probe_ent->port[p]);
- p++;
I've patched 2.6.15-mm4 with this, and yes, this patch changed the behaviour:
OK TIMEOUT OK OK TIMEOUT TIMEOUT TIMEOUT TIMEOUT OK TIMEOUT TIMEOUT OK TIMEOUT
TIMEOUT TIMEOUT
OK was when we got through to completion of single user mode, TIMEOUT - see below.
So no oopsing with that patch applied, which is a definite improvement.
Previously to this I was seeing the OOPSing most of the time and the TIMEOUTS
more occasionally.
---
Now, looking at the timeouts, here's the log from a boot:
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 193
ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led slum part
ata1: SATA max UDMA/133 cmd 0xF8804D00 ctl 0x0 bmdma 0x0 irq 50
ata2: SATA max UDMA/133 cmd 0xF8804D80 ctl 0x0 bmdma 0x0 irq 50
ata3: SATA max UDMA/133 cmd 0xF8804E00 ctl 0x0 bmdma 0x0 irq 50
ata4: SATA max UDMA/133 cmd 0xF8804E80 ctl 0x0 bmdma 0x0 irq 50
ata1: SATA link up 1.5 Gbps (SStatus 113)
ata1 is slow to respond, please be patient
ata1 failed to respond (30 secs)
scsi0 : ahci
ata2: SATA link up 1.5 Gbps (SStatus 113)
ata2 is slow to respond, please be patient
ata2 failed to respond (30 secs)
scsi1 : ahci
ata3: SATA link up 1.5 Gbps (SStatus 113)
ata3 is slow to respond, please be patient
ata3 failed to respond (30 secs)
scsi2 : ahci
ata4: SATA link down (SStatus 0)
scsi3 : ahci
When there is no timeout it looks like this:
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 193
ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led slum part
ata1: SATA max UDMA/133 cmd 0xF8804D00 ctl 0x0 bmdma 0x0 irq 193
ata2: SATA max UDMA/133 cmd 0xF8804D80 ctl 0x0 bmdma 0x0 irq 193
ata3: SATA max UDMA/133 cmd 0xF8804E00 ctl 0x0 bmdma 0x0 irq 193
ata4: SATA max UDMA/133 cmd 0xF8804E80 ctl 0x0 bmdma 0x0 irq 193
ata1: SATA link up 1.5 Gbps (SStatus 113)
ata1: dev 0 ATA-6, max UDMA/133, 156301488 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : ahci
ata2: SATA link up 1.5 Gbps (SStatus 113)
ata2: dev 0 ATA-6, max UDMA/133, 156301488 sectors: LBA48
ata2: dev 0 configured for UDMA/133
scsi1 : ahci
ata3: SATA link up 1.5 Gbps (SStatus 113)
ata3: dev 0 ATA-6, max UDMA/133, 156299375 sectors: LBA48
ata3: dev 0 configured for UDMA/133
scsi2 : ahci
ata4: SATA link down (SStatus 0)
scsi3 : ahci
Note the different IRQ numbers (50, 193) and how when it breaks, the ATA
interfaces have a different IRQ to the AHCI controller.
There's a full log up at http://lkml.org/lkml/2006/1/11/492 from when I posted
on lkml and at http://www.reub.net/files/kernel/ when the box isn't down for
testing ;-)
This may be a separate but related problem to the oops, I guess.
reuben
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Stuff]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
[Linux Resources]
