Using kernel 2.6.11 on Mandriva LE 2005, I am seeing a lot of tulip
errors in my logs:
0000:02:09.0: tulip_stop_rxtx() failed
It doesn't seem to impact the performance, although it fills up my logs.
The card is connected to the ADSL modem. Any idea as to what could be
causing this?
Bad cable?
The box is remote so I cannot do much with hardware right now.
Cheers,
Jerome
> ifconfig eth0
eth0 Lien encap:Ethernet HWaddr 00:80:AD:20:1D:66
adr inet6: fe80::280:adff:fe20:1d66/64 Scope:Lien
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:242073 errors:4010 dropped:0 overruns:0 frame:0
TX packets:231702 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:71151194 (67.8 Mb) TX bytes:48721547 (46.4 Mb)
Interruption:3 Adresse de base:0xd800
> uname -a
Linux localhost 2.6.11-12mdk-i586-up-1GB #1 Mon Jun 27 21:49:58 MDT
2005 i686 Pentium III (Coppermine) unknown GNU/Linux
> cat /proc/interrupts
CPU0
0: 9415381 XT-PIC timer
1: 6557 XT-PIC i8042
2: 0 XT-PIC cascade
3: 602974 XT-PIC eth0
8: 1 XT-PIC rtc
9: 3727677 XT-PIC Ensoniq AudioPCI
10: 66 XT-PIC uhci_hcd
11: 790910 XT-PIC r128@pci:0000:01:00.0
12: 482453 XT-PIC i8042
14: 133760 XT-PIC ide0
15: 11898 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0
> lspci
00:00.0 Host bridge: Intel Corporation 82815 815 Chipset Host Bridge
and Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82815 815 Chipset AGP Bridge (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 02)
00:1f.0 ISA bridge: Intel Corporation 82801BA ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801BA IDE U100 (rev 02)
00:1f.2 USB Controller: Intel Corporation 82801BA/BAM USB (Hub #1) (rev 02)
00:1f.3 SMBus: Intel Corporation 82801BA/BAM SMBus (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128
PF/PRO AGP 4x TMDS
02:09.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x
DEC-Tulip compatible 10/100 Ethernet (rev 31)
02:0a.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 46)
02:0c.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 09)
02:09.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x
DEC-Tulip compatible 10/100 Ethernet (rev 31)
Subsystem: Unknown device 4554:434e
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (5000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 3
Region 0: I/O ports at d800 [size=256]
Region 1: Memory at ff9ffc00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at ff980000 [disabled] [size=256K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=220mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> mii-tool -v
eth0: negotiated 100baseTx-FD, link ok
product info: vendor 00:60:6e, model 4 rev 0
basic mode: autonegotiation enabled
basic status: autonegotiation complete, link ok
capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |