On Wed, Jul 20, 2005 at 12:49:00PM +0530, [email protected] wrote:
>
> Hi David ,
>
> On my controller CF INPACK pin is connected to 3.3v. so Comapct
> flash with DMA capabilty will not be supported , i understood this .
> but i did not undesrtand why only PIO mode 1 is supported is it ,
> why not PIO mode 4 , is it a limitation of pcmcia driver , correct
> me if i am wrong
The 16-bit PCMCIA bus is maxed out at about 1 MB/sec; that's all the
bandwidth there is. What your card supports is irrelevant.
I'm not sure whether the PCMCIA mode actually corresponds to any of
the official PIO modes 0, 1, etc. It is just "slow".
-- Dave
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
[Index of Archives]
[Kernel Newbies]
[Netfilter]
[Bugtraq]
[Photo]
[Gimp]
[Yosemite News]
[MIPS Linux]
[ARM Linux]
[Linux Security]
[Linux RAID]
[Video 4 Linux]
[Linux for the blind]
| |
 |