Re: What breaks aic7xxx in post 2.6.12-rc2 ?

[James Bottomley <James.Bottomley@SteelEye.com>]

On Mon, 2005-06-13 at 20:37 +0200, =?utf-8?Q?Gr=E9goire?= Favre wrote:
> target1:0:1: SC IS ffff81003fca89c0
> 
>  target1:0:1: scsirate IS 0xf, min_period is 9
> 
>  target1:0:1: asynchronous.
> 
>   Vendor: TOSHIBA   Model: DVD-ROM SD-M1201  Rev: 1R08
> 
>   Type:   CD-ROM                             ANSI SCSI revision: 02
> 
>  target1:0:1: Beginning Domain Validation
> 
>  target1:0:1: Domain Validation skipping write tests
> 
>  target1:0:1: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15)

OK, this is what tells me there's an error in the bios reading routines
for ultra cards.

Can you try this (it should apply straight on your currently patched
2.6.12-rc6 tree)... hopefully I've been more careful in the bios reading
routines for the ultra (and fast) cards.

Thanks,

James

diff -u b/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
--- b/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -622,26 +622,37 @@
 
 	dev_printk(KERN_ERR, &starget->dev, "SC IS %p\n", sc);
 	if (sc) {
+		int maxsync = AHC_SYNCRATE_DT;
+		int ultra = 0;
+		int flags = sc->device_flags[target_offset];
+
+		if (ahc->flags & AHC_NEWEEPROM_FMT) {
+		    if (flags & CFSYNCHISULTRA)
+			ultra = 1;
+		} else if (flags & CFULTRAEN)
+			ultra = 1;
+		/* AIC nutcase; 10MHz appears as ultra = 1, CFXFER = 0x04
+		 * change it to ultra=0, CFXFER = 0 */
+		if(ultra && (flags & CFXFER) == 0x04) {
+			dev_printk(KERN_ERR, &starget->dev, "10MHz, flags 0x%x\n", flags);
+			ultra = 0;
+			flags &= ~CFXFER;
+		}
+	    
 		if ((ahc->features & AHC_ULTRA2) != 0) {
-			scsirate = sc->device_flags[target_offset] & CFXFER;
-			dev_printk(KERN_ERR, &starget->dev, "ULTRA2\n");
+			scsirate = (flags & CFXFER) | ultra ? 0x8 : 0;
+			dev_printk(KERN_ERR, &starget->dev, "ULTRA2, flags 0x%x\n", flags);
 		} else {
-			scsirate = (sc->device_flags[target_offset] & CFXFER) << 4;
-			if (sc->device_flags[target_offset] & CFSYNCH)
-				scsirate |= SOFS;
+			scsirate = (flags & CFXFER) << 4;
+			maxsync = ultra ? AHC_SYNCRATE_ULTRA : 
+				AHC_SYNCRATE_FAST;
 		}
-		if (sc->device_flags[target_offset] & CFWIDEB) {
-			scsirate |= WIDEXFER;
-			spi_max_width(starget) = 1;
-		} else
-			spi_max_width(starget) = 0;
-		spi_min_period(starget) = 
-			ahc_find_period(ahc, scsirate, AHC_SYNCRATE_DT);
-		dev_printk(KERN_ERR, &starget->dev, "scsirate IS 0x%x, min_period is %d\n", scsirate, spi_min_period(starget));
-		if (spi_min_period(starget) == 0)
-			/* This means async, so set offset to zero */
+		spi_max_width(starget) = (flags & CFWIDEB) ? 1 : 0;
+		if (!(flags & CFSYNCH))
 			spi_max_offset(starget) = 0;
-		
+		spi_min_period(starget) = 
+			ahc_find_period(ahc, scsirate, maxsync);
+		dev_printk(KERN_ERR, &starget->dev, "scsirate IS 0x%x, min_period is %d, flags 0x%x\n", scsirate, spi_min_period(starget), flags);
 
 		tinfo = ahc_fetch_transinfo(ahc, channel, ahc->our_id,
 					    starget->id, &tstate);



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/