On Saturday, March 26, 2011 01:04:31 am JD wrote: > That said, I do not know of any way that will let you > connect your drive to any (Linux?) system and expect it to be automounted > onto some specific mount point (assuming the mount point exists). F14 at least will take an ext4 formatted disk and automount it to /media/$LABEL where the label is set with e2label. Likewise with any filesystem F14 supports, using the filesystem-appropriate label utility. As to ownership, you have to set that after it's mounted with the normal filesystem tools. Example: [root@localhost ~]# mount [snip] /dev/sdb1 on /media/wd500gbu3-bak type ext4 (rw,nosuid,nodev) [root@localhost ~]# e2label /dev/sdb1 wd500gbu3-bak [root@localhost ~]#dmesg [snip] [ 27.017416] usb 6-1: new SuperSpeed USB device using xhci_hcd and address 2 [ 27.029856] xhci_hcd 0000:0d:00.0: WARN: short transfer on control ep [ 27.030227] xhci_hcd 0000:0d:00.0: WARN: short transfer on control ep [ 27.030609] xhci_hcd 0000:0d:00.0: WARN: short transfer on control ep [ 27.031094] xhci_hcd 0000:0d:00.0: WARN: short transfer on control ep [ 27.031281] usb 6-1: New USB device found, idVendor=1058, idProduct=0730 [ 27.031290] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 27.031297] usb 6-1: Product: My Passport 0730 [ 27.031301] usb 6-1: Manufacturer: Western Digital [ 27.031306] usb 6-1: SerialNumber: YOUDIDNTTHINKIDLEAVETHISHEREDIDYOU [ 27.121613] Initializing USB Mass Storage driver... [ 27.121766] scsi2 : usb-storage 6-1:1.0 [ 27.121876] usbcore: registered new interface driver usb-storage [ 27.121879] USB Mass Storage support registered. [ 29.104203] scsi 2:0:0:0: Direct-Access WD My Passport 0730 1012 PQ: 0 ANSI: 6 [ 29.104608] scsi 2:0:0:1: Enclosure WD SES Device 1012 PQ: 0 ANSI: 6 [ 29.107469] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 29.107640] scsi 2:0:0:1: Attached scsi generic sg3 type 13 [ 32.934134] sd 2:0:0:0: [sdb] 976707584 512-byte logical blocks: (500 GB/465 GiB) [snip] Works just like automount of a USB flash drive does. -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
