Patrick, Thought for a moment that your Modem was a Serial Modem, that would be supported through the native serial driver. It might turn out to be a "WinModem" for which I would recommend downloading scanModem script by Marvin Stodlsky http://linmodems.technion.ac.il/packages/scanModem.gz copy it to your linux partition/desktop run $ gunzip scanModem.gz $ chmod +x scanModem $ su - passwd: change to the directory where scanModem file is at and run # ./scanModem it will create a folder named Modem/ with some information. Send me the file ModemData.txt to me (offlist prefered, since some folks on the list might be offended) and I can help out determine which driver you may use to get online. Regards, Antonio --- On Sat, 9/18/10, Patrick Dupre <pd520@xxxxxxxxxx> wrote: > From: Patrick Dupre <pd520@xxxxxxxxxx> > Subject: Re: Modem > To: "Community support for Fedora users" <users@xxxxxxxxxxxxxxxxxxxxxxx> > Cc: "Fedora List" <fedora-list@xxxxxxxxxx> > Date: Saturday, September 18, 2010, 1:38 PM > More information, > > With the network manager, I switched to /dev/ttyS2 and it > says that > ppp0 is active, but it does not dial the provider number. > RTNETLINK answers: No such process > Warning: can't open options file /root/.ppprc: Permission > denied > > > I also get: > setserial /dev/ttyS2 > /dev/ttyS2, UART: unknown, Port: 0x03e8, IRQ: 4 > > > and > wvdialconf /etc/wvdial.conf > Editing `/etc/wvdial.conf'. > > Scanning your serial ports for a modem. > > Modem Port Scan<*1>: > S0 S1 S2 S3 > > > Sorry, no modem was detected! Is it in use by another > program? > Did you configure it properly with setserial? > > > > > > > --- On Sat, 9/18/10, Patrick Dupre <pd520@xxxxxxxxxx> > wrote: > > > >> From: Patrick Dupre <pd520@xxxxxxxxxx> > >> Subject: Modem > >> To: "Fedora List" <fedora-list@xxxxxxxxxx> > >> Date: Saturday, September 18, 2010, 8:19 AM > >> > >> Hello, > >> > >> I am unable to activate a connection when using my > modem > >> (inspiron 9400 with fedora 13). > >> (Modem conexant HDA DIOOMDC V.92 Modem CDM3) > >> > >> I am not sure that it is the right place to post > this > >> email, but maybe > >> somebody can help me. > >> I copied some of the configuration files. > >> > >> When I do ifup ppp0, I get: > >> RTNETLINK,answers: No such process. > >> pppd unrecognized option /dev/modem > >> > >> Thank for your help. > >> > >> > >> /etc/ppd/ip-up > >> > >> #!/bin/bash > >> # This file should not be modified -- make local > changes > >> to > >> # /etc/ppp/ip-up.local instead > >> > >> PATH=/sbin:/usr/sbin:/bin:/usr/bin > >> export PATH > >> > >> LOGDEVICE=$6 > >> REALDEVICE=$1 > >> > >> [ -f > /etc/sysconfig/network-scripts/ifcfg-${LOGDEVICE} ] > >> && > /etc/sysconfig/network-scripts/ifup-post > >> --realdevice ${REALDEVICE} ifcfg-${LOGDEVICE} > >> > >> /etc/ppp/ip-up.ipv6to4 ${LOGDEVICE} > >> > >> [ -x /etc/ppp/ip-up.local ] && > /etc/ppp/ip-up.local > >> "$@" > >> > >> exit 0 > >> ++++++++++++++++++++++++++++++++++++++ > >> /etc/ppp/options > >> > >> lock > >> > ++++++++++++++++++++++++++++++++++++++++++++++++++ > >> /etc/ppp/option.ppp > >> > >> > ############################################################################### > >> # $Id: options.pptp,v 1.3 2006/03/26 23:11:05 > quozl Exp $ > >> # > >> # Sample PPTP PPP options file > /etc/ppp/options.pptp > >> # Options used by PPP when a connection is made by > a PPTP > >> client. > >> # This file can be referred to by an > /etc/ppp/peers file > >> for the tunnel. > >> # Changes are effective on the next connection. > See > >> "man pppd". > >> # > >> # You are expected to change this file to suit > your > >> system. As > >> # packaged, it requires PPP 2.4.2 or later from http://ppp.samba.org/ > >> # and the kernel MPPE module available from the > CVS > >> repository also on > >> # http://ppp.samba.org/, which is packaged for DKMS as > >> kernel_ppp_mppe. > >> > ############################################################################### > >> > >> # Lock the port > >> lock > >> > >> # Authentication > >> # We don't need the tunnel server to authenticate > itself > >> noauth > >> > >> # We won't do PAP, EAP, CHAP, or MSCHAP, but we > will accept > >> MSCHAP-V2 > >> # (you may need to remove these refusals if the > server is > >> not using MPPE) > >> refuse-pap > >> refuse-eap > >> refuse-chap > >> refuse-mschap > >> > >> # Compression > >> # Turn off compression protocols we know won't be > used > >> nobsdcomp > >> nodeflate > >> > >> # Encryption > >> # (There have been multiple versions of PPP with > encryption > >> support, > >> # choose with of the following sections you will > use. > >> Note that MPPE > >> # requires the use of MSCHAP-V2 during > authentication) > >> > >> # http://ppp.samba.org/ the PPP project version of PPP > by > >> Paul Mackarras > >> # ppp-2.4.2 or later with MPPE only, kernel > module > >> ppp_mppe.o > >> # {{{ > >> # Require MPPE 128-bit encryption > >> #require-mppe-128 > >> # }}} > >> > >> # http://polbox.com/h/hs001/ fork from PPP > project by Jan > >> Dubiec > >> # ppp-2.4.2 or later with MPPE and MPPC, kernel > module > >> ppp_mppe_mppc.o > >> # {{{ > >> # Require MPPE 128-bit encryption > >> #mppe required,stateless > >> # }}} > >> > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > >> /etc/ppp/wmdial.conf > >> > >> [Modem0] > >> Modem = /dev/modem > >> Baud = 57600 > >> SetVolume = 1 > >> Dial Command = ATDP > >> Init1 = ATZ > >> Init3 = ATM1L1 > >> FlowControl = CRTSCTS > >> [Dialer SFR] > >> Username = tele2@xxxxxxxx > >> Password = mys > >> Phone = 0860652000 > >> Stupid Mode = 1 > >> Init1 = ATZ > >> Inherits = Modem0 > >> +++++++++++++++++++++++++++++++++++++++++++++++++ > >> > >> /etc/ppp/peers/SFR > >> > >> connect "/usr/bin/wvdial --remotename SFR --chat > 'SFR'" > >> > +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > >> > >> /etc/ppp/peers/wmdial > >> > >> noauth > >> name wvdial > >> usepeerdns > >> > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > >> > >> > >> > >> -- --- > >> > ========================================================================== > >> Patrick DUPRÉ > >> | | > >> Department of Chemistry > >> | | Phone: > >> (44)-(0)-1904-434384 > >> The University of York > >> | | > >> Fax: (44)-(0)-1904-432516 > >> Heslington > >> > >> | | > >> York YO10 5DD United Kingdom > >> | | email: pd520@xxxxxxxxxx > >> > ========================================================================== > >> -----Inline Attachment Follows----- > >> > > > > > > Patrick, > > > > If the modem you have referenced above, then please do > the following to see if you can get connected: > > Fire up a terminal and run > > > > $ su - > > passwd: > > # wvdialconf /etc/wvdial.conf > > > > if a modem is found, could be /dev/ttyS0 ... > /dev/ttyS3? then proceed to edit > /etc/wvdial.conf and add your username, ISP phone no, and > Password. then after you are done save that file and try > > > > # wvdial > > > > check to see if you can connect? If you cannot > edit the file /etc/resolv.conf by pasting the numbers output > by wvdial that show up when it is connected. Add these > with to the file /etc/resolv.conf with the word nameserver > in front of them. Let me know if this helped or not. > > > > Regards, > > > > > > Antonio > > > > > > > > > > -- > --- > ========================================================================== > Patrick DUPRÉ > > | | > Department of Chemistry > | | Phone: > (44)-(0)-1904-434384 > The University of York > | | > Fax: (44)-(0)-1904-432516 > Heslington > > | | > York YO10 5DD United Kingdom > | | email: pd520@xxxxxxxxxx > ========================================================================== > -----Inline Attachment Follows----- > > -- > users mailing list > users@xxxxxxxxxxxxxxxxxxxxxxx > To unsubscribe or change subscription options: > https://admin.fedoraproject.org/mailman/listinfo/users > Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines > -- users mailing list users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
