More information,
With the network manager, I switched to /dev/ttyS2 and it says that
ppp0 is active, but it does not dial the provider number.
RTNETLINK answers: No such process
Warning: can't open options file /root/.ppprc: Permission denied
I also get:
setserial /dev/ttyS2
/dev/ttyS2, UART: unknown, Port: 0x03e8, IRQ: 4
and
wvdialconf /etc/wvdial.conf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
--- On Sat, 9/18/10, Patrick Dupre <pd520@xxxxxxxxxx> wrote:
From: Patrick Dupre <pd520@xxxxxxxxxx>
Subject: Modem
To: "Fedora List" <fedora-list@xxxxxxxxxx>
Date: Saturday, September 18, 2010, 8:19 AM
Hello,
I am unable to activate a connection when using my modem
(inspiron 9400 with fedora 13).
(Modem conexant HDA DIOOMDC V.92 Modem CDM3)
I am not sure that it is the right place to post this
email, but maybe
somebody can help me.
I copied some of the configuration files.
When I do ifup ppp0, I get:
RTNETLINK,answers: No such process.
pppd unrecognized option /dev/modem
Thank for your help.
/etc/ppd/ip-up
#!/bin/bash
# This file should not be modified -- make local changes
to
# /etc/ppp/ip-up.local instead
PATH=/sbin:/usr/sbin:/bin:/usr/bin
export PATH
LOGDEVICE=$6
REALDEVICE=$1
[ -f /etc/sysconfig/network-scripts/ifcfg-${LOGDEVICE} ]
&& /etc/sysconfig/network-scripts/ifup-post
--realdevice ${REALDEVICE} ifcfg-${LOGDEVICE}
/etc/ppp/ip-up.ipv6to4 ${LOGDEVICE}
[ -x /etc/ppp/ip-up.local ] && /etc/ppp/ip-up.local
"$@"
exit 0
++++++++++++++++++++++++++++++++++++++
/etc/ppp/options
lock
++++++++++++++++++++++++++++++++++++++++++++++++++
/etc/ppp/option.ppp
###############################################################################
# $Id: options.pptp,v 1.3 2006/03/26 23:11:05 quozl Exp $
#
# Sample PPTP PPP options file /etc/ppp/options.pptp
# Options used by PPP when a connection is made by a PPTP
client.
# This file can be referred to by an /etc/ppp/peers file
for the tunnel.
# Changes are effective on the next connection. See
"man pppd".
#
# You are expected to change this file to suit your
system. As
# packaged, it requires PPP 2.4.2 or later from http://ppp.samba.org/
# and the kernel MPPE module available from the CVS
repository also on
# http://ppp.samba.org/, which is packaged for DKMS as
kernel_ppp_mppe.
###############################################################################
# Lock the port
lock
# Authentication
# We don't need the tunnel server to authenticate itself
noauth
# We won't do PAP, EAP, CHAP, or MSCHAP, but we will accept
MSCHAP-V2
# (you may need to remove these refusals if the server is
not using MPPE)
refuse-pap
refuse-eap
refuse-chap
refuse-mschap
# Compression
# Turn off compression protocols we know won't be used
nobsdcomp
nodeflate
# Encryption
# (There have been multiple versions of PPP with encryption
support,
# choose with of the following sections you will use.
Note that MPPE
# requires the use of MSCHAP-V2 during authentication)
# http://ppp.samba.org/ the PPP project version of PPP by
Paul Mackarras
# ppp-2.4.2 or later with MPPE only, kernel module
ppp_mppe.o
# {{{
# Require MPPE 128-bit encryption
#require-mppe-128
# }}}
# http://polbox.com/h/hs001/ fork from PPP project by Jan
Dubiec
# ppp-2.4.2 or later with MPPE and MPPC, kernel module
ppp_mppe_mppc.o
# {{{
# Require MPPE 128-bit encryption
#mppe required,stateless
# }}}
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
/etc/ppp/wmdial.conf
[Modem0]
Modem = /dev/modem
Baud = 57600
SetVolume = 1
Dial Command = ATDP
Init1 = ATZ
Init3 = ATM1L1
FlowControl = CRTSCTS
[Dialer SFR]
Username = tele2@xxxxxxxx
Password = mys
Phone = 0860652000
Stupid Mode = 1
Init1 = ATZ
Inherits = Modem0
+++++++++++++++++++++++++++++++++++++++++++++++++
/etc/ppp/peers/SFR
connect "/usr/bin/wvdial --remotename SFR --chat 'SFR'"
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
/etc/ppp/peers/wmdial
noauth
name wvdial
usepeerdns
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- ---
==========================================================================
Patrick DUPRÉ
| |
Department of Chemistry
| | Phone:
(44)-(0)-1904-434384
The University of York
| |
Fax: (44)-(0)-1904-432516
Heslington
| |
York YO10 5DD United Kingdom
| | email: pd520@xxxxxxxxxx
==========================================================================
-----Inline Attachment Follows-----
Patrick,
If the modem you have referenced above, then please do the following to see if you can get connected:
Fire up a terminal and run
$ su -
passwd:
# wvdialconf /etc/wvdial.conf
if a modem is found, could be /dev/ttyS0 ... /dev/ttyS3? then proceed to edit /etc/wvdial.conf and add your username, ISP phone no, and Password. then after you are done save that file and try
# wvdial
check to see if you can connect? If you cannot edit the file /etc/resolv.conf by pasting the numbers output by wvdial that show up when it is connected. Add these with to the file /etc/resolv.conf with the word nameserver in front of them. Let me know if this helped or not.
Regards,
Antonio
--
---
==========================================================================
Patrick DUPRÃ? | |
Department of Chemistry | | Phone: (44)-(0)-1904-434384
The University of York | | Fax: (44)-(0)-1904-432516
Heslington | |
York YO10 5DD United Kingdom | | email: pd520@xxxxxxxxxx
==========================================================================
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
