X crashes on diskless NFS mounted / filesystem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Fully updated F13 kernel 2.6.34.6-47.fc13.x86_64
I have even tried upgrading to xorg-x11-drv-intel 2.12 from koji  ajax
build (no joy)

The boot process fails launching X. It keeps showing

init.orig:  prefdm main process ended respawning
init.orig:  prefdm main process [1913] terminated with status 1

until it says respawning too fast, stopped

I have tried setting an xorg.conf file and also without it (no joy)

I have posted

xorg.conf
/var/log/Xorg.0.log
dmesg

below. Please help if you know how to solve this as it's for a school. Thanks

# Xorg configuration created by system-config-display

Section "ServerLayout"
	Identifier     "single head configuration"
	Screen      0  "Screen0" 0 0
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "InputDevice"
# keyboard added by system-config-display
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105+inet"
	Option	    "XkbLayout" "us"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "intel"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection





Xorg.0.log

[    40.790]
X.Org X Server 1.8.2
Release Date: 2010-07-01
[    40.790] X Protocol Version 11, Revision 0
[    40.790] Build Operating System: x86-16 2.6.32-44.el6.x86_64
[    40.790] Current Operating System: Linux drbl213
2.6.34.6-47.fc13.x86_64 #1 SMP Fri Aug 27 08:56:01 UTC 2010 x86_64
[    40.790] Kernel command line: initrd=initrd-pxe.img devfs=nomount
drblthincli=off selinux=0 nomodeset     BOOT_IMAGE=vmlinuz-pxe
[    40.790] Build Date: 03 August 2010  05:10:46AM
[    40.790] Build ID: xorg-x11-server 1.8.2-3.fc13
[    40.790] Current version of pixman: 0.18.0
[    40.790] 	Before reporting problems, check http://bodhi.fedoraproject.org/
	to make sure that you have the latest version.
[    40.790] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    40.790] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep  8
19:29:31 2010
[    40.794] (==) Using config file: "/etc/X11/xorg.conf"
[    40.794] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    40.794] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    40.794] (==) ServerLayout "single head configuration"
[    40.794] (**) |-->Screen "Screen0" (0)
[    40.794] (**) |   |-->Monitor "<default monitor>"
[    40.795] (**) |   |-->Device "Videocard0"
[    40.795] (==) No monitor specified for screen "Screen0".
	Using a default monitor configuration.
[    40.795] (**) |-->Input Device "Keyboard0"
[    40.795] (==) Automatically adding devices
[    40.795] (==) Automatically enabling devices
[    40.795] (==) FontPath set to:
	catalogue:/etc/X11/fontpath.d,
	built-ins
[    40.795] (==) ModulePath set to "/usr/lib64/xorg/modules"
[    40.795] (II) The server relies on udev to provide the list of
input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    40.795] (II)
***************************************************************
***************************************************************
** Fedora switched to udev-based device detection with       **
** xorg-x11-server-1.7.99.901-1. Custom HAL configuration    **
** stored in /etc/hal/fdi/policy will not be seen by this    **
** server version. If you have such configuration you will   **
** need to update it to the new format.                      **
** For more information, see the Fedora wiki page            **
** https://fedoraproject.org/wiki/Input_device_configuration **
***************************************************************
***************************************************************
[    40.795] (WW) AllowEmptyInput is on, devices using drivers 'kbd',
'mouse' or 'vmmouse' will be disabled.
[    40.795] (WW) Disabling Keyboard0
[    40.795] (II) Loader magic: 0x7cfa40
[    40.795] (II) Module ABI versions:
[    40.795] 	X.Org ANSI C Emulation: 0.4
[    40.795] 	X.Org Video Driver: 7.0
[    40.795] 	X.Org XInput driver : 9.0
[    40.795] 	X.Org Server Extension : 3.0
[    40.810] (--) PCI:*(0:0:2:0) 8086:2e12:1028:027f Intel Corporation
4 Series Chipset Integrated Graphics Controller rev 3, Mem @
0xfe800000/4194304, 0xd0000000/268435456, I/O @ 0x0000ec90/8, BIOS @
0x????????/131072
[    40.810] (--) PCI: (0:0:2:1) 8086:2e13:1028:027f Intel Corporation
4 Series Chipset Integrated Graphics Controller rev 3, Mem @
0xfe700000/1048576, BIOS @ 0x????????/65536
[    40.810] (II) LoadModule: "extmod"
[    40.813] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[    40.815] (II) Module extmod: vendor="X.Org Foundation"
[    40.815] 	compiled for 1.8.2, module version = 1.0.0
[    40.815] 	Module class: X.Org Server Extension
[    40.815] 	ABI class: X.Org Server Extension, version 3.0
[    40.815] (II) Loading extension SELinux
[    40.815] (II) Loading extension MIT-SCREEN-SAVER
[    40.815] (II) Loading extension XFree86-VidModeExtension
[    40.815] (II) Loading extension XFree86-DGA
[    40.815] (II) Loading extension DPMS
[    40.815] (II) Loading extension XVideo
[    40.815] (II) Loading extension XVideo-MotionCompensation
[    40.815] (II) Loading extension X-Resource
[    40.815] (II) LoadModule: "dbe"
[    40.817] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[    40.818] (II) Module dbe: vendor="X.Org Foundation"
[    40.818] 	compiled for 1.8.2, module version = 1.0.0
[    40.818] 	Module class: X.Org Server Extension
[    40.818] 	ABI class: X.Org Server Extension, version 3.0
[    40.818] (II) Loading extension DOUBLE-BUFFER
[    40.818] (II) LoadModule: "glx"
[    40.820] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    40.821] (II) Module glx: vendor="X.Org Foundation"
[    40.821] 	compiled for 1.8.2, module version = 1.0.0
[    40.821] 	ABI class: X.Org Server Extension, version 3.0
[    40.821] (==) AIGLX enabled
[    40.821] (II) Loading extension GLX
[    40.821] (II) LoadModule: "record"
[    40.823] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[    40.824] (II) Module record: vendor="X.Org Foundation"
[    40.824] 	compiled for 1.8.2, module version = 1.13.0
[    40.824] 	Module class: X.Org Server Extension
[    40.824] 	ABI class: X.Org Server Extension, version 3.0
[    40.824] (II) Loading extension RECORD
[    40.824] (II) LoadModule: "dri"
[    40.827] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[    40.828] (II) Module dri: vendor="X.Org Foundation"
[    40.828] 	compiled for 1.8.2, module version = 1.0.0
[    40.828] 	ABI class: X.Org Server Extension, version 3.0
[    40.828] (II) Loading extension XFree86-DRI
[    40.828] (II) LoadModule: "dri2"
[    40.830] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[    40.831] (II) Module dri2: vendor="X.Org Foundation"
[    40.831] 	compiled for 1.8.2, module version = 1.2.0
[    40.831] 	ABI class: X.Org Server Extension, version 3.0
[    40.831] (II) Loading extension DRI2
[    40.831] (II) LoadModule: "intel"
[    40.833] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[    40.834] (II) Module intel: vendor="X.Org Foundation"
[    40.834] 	compiled for 1.8.2, module version = 2.12.0
[    40.834] 	Module class: X.Org Video Driver
[    40.834] 	ABI class: X.Org Video Driver, version 7.0
[    40.834] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[    40.835] (--) using VT number 7

[    40.839] (II) Primary Device is: PCI 00@00:02:0
[    40.855] (EE) intel(0): No kernel modesetting driver detected.
[    40.855] (II) UnloadModule: "intel"
[    40.855] (EE) Screen(s) found, but none have a usable configuration.
[    40.855]
Fatal server error:
[    40.855] no screens found
[    40.855]
Please consult the Fedora Project support
	 at http://bodhi.fedoraproject.org/
 for help.
[    40.855] Please also check the log file at "/var/log/Xorg.0.log"
for additional information.
[    40.855]





dmesg

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.34.6-47.fc13.x86_64
(mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.4 20100630
(Red Hat 4.4.4-10) (GCC) ) #1 SMP Fri Aug 27 08:56:01 UTC 2010
Command line: initrd=initrd-pxe.img devfs=nomount drblthincli=off
selinux=0 nomodeset     BOOT_IMAGE=vmlinuz-pxe
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007bbffc00 (usable)
 BIOS-e820: 000000007bbffc00 - 000000007bc53c00 (ACPI NVS)
 BIOS-e820: 000000007bc53c00 - 000000007bc55c00 (ACPI data)
 BIOS-e820: 000000007bc55c00 - 000000007e000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.5 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7bbff max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 07BE00000 mask FFFE00000 uncachable
  1 base 07C000000 mask FFC000000 uncachable
  2 base 07BD00000 mask FFFF00000 uncachable
  3 base 080000000 mask F80000000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 base 079D00000 mask FFFF00000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fe710] fe710
init_memory_mapping: 0000000000000000-000000007bbff000
 0000000000 - 007ba00000 page 2M
 007ba00000 - 007bbff000 page 4k
kernel direct mapping tables up to 7bbff000 @ 8000-c000
RAMDISK: 7aa51000 - 7bbdf000
ACPI: RSDP 00000000000fec00 00024 (v02 DELL  )
ACPI: XSDT 00000000000fc7ef 0008C (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: FACP 00000000000fc91f 000F4 (v03 DELL    B10K    00000015 ASL  00000061)
ACPI: DSDT 00000000fff1be4d 053BE (v01   DELL    dt_ex 00001000 INTL 20050624)
ACPI: FACS 000000007bbffc00 00040
ACPI: SSDT 00000000fff2132a 000AA (v01   DELL    st_ex 00001000 INTL 20050624)
ACPI: APIC 00000000000fca13 00092 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: BOOT 00000000000fcaa5 00028 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: ASF! 00000000000fcacd 00096 (v32 DELL    B10K    00000015 ASL  00000061)
ACPI: MCFG 00000000000fcb63 0003E (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: HPET 00000000000fcba1 00038 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: TCPA 00000000000fcdfd 00032 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: ____ 00000000000fce2f 00030 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: SLIC 00000000000fcbd9 00176 (v01 DELL    B10K    00000015 ASL  00000061)
ACPI: SSDT 000000007bbffc40 001B7 (v01 DpgPmm  Cpu0Ist 00000011 INTL 20050624)
ACPI: SSDT 000000007bc00049 001B7 (v01 DpgPmm  Cpu1Ist 00000011 INTL 20050624)
ACPI: SSDT 000000007bc00452 00190 (v01 DpgPmm    CpuPm 00000010 INTL 20050624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000007bbff000
Initmem setup node 0 0000000000000000-000000007bbff000
  NODE_DATA [0000000001e0c200 - 0000000001e201ff]
  bootmap [0000000001e21000 -  0000000001e3077f] pages 10
(13/32 early reservations) ==> bootmem [0000000000 - 007bbff000]
  #0 [0001000000 - 0001e0be88]    TEXT DATA BSS ==> [0001000000 - 0001e0be88]
  #1 [007aa51000 - 007bbdf000]          RAMDISK ==> [007aa51000 - 007bbdf000]
  #2 [0001e0c000 - 0001e0c1f0]              BRK ==> [0001e0c000 - 0001e0c1f0]
  #3 [00000fe720 - 0000100000]    BIOS reserved ==> [00000fe720 - 0000100000]
  #4 [00000fe710 - 00000fe720]     MP-table mpf ==> [00000fe710 - 00000fe720]
  #5 [000009f800 - 00000f0000]    BIOS reserved ==> [000009f800 - 00000f0000]
  #6 [00000f029c - 00000fe710]    BIOS reserved ==> [00000f029c - 00000fe710]
  #7 [00000f0000 - 00000f029c]     MP-table mpc ==> [00000f0000 - 00000f029c]
  #8 [0000001000 - 0000003000]       TRAMPOLINE ==> [0000001000 - 0000003000]
  #9 [0000003000 - 0000007000]      ACPI WAKEUP ==> [0000003000 - 0000007000]
  #10 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
  #11 [0001e0c200 - 0001e20200]        NODE_DATA ==> [0001e0c200 - 0001e20200]
  #12 [0001e21000 - 0001e31000]          BOOTMAP ==> [0001e21000 - 0001e31000]
 [ffffea0000000000-ffffea0001bfffff] PMD ->
[ffff880002800000-ffff8800043fffff] on node 0
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000001 -> 0x0000009f
    0: 0x00000100 -> 0x0007bbff
On node 0 totalpages: 506781
  DMA zone: 56 pages used for memmap
  DMA zone: 103 pages reserved
  DMA zone: 3839 pages, LIFO batch:0
  DMA32 zone: 6874 pages used for memmap
  DMA32 zone: 495909 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 6 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 7e000000 (gap: 7e000000:62000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff880002000000 s89768 r8192 d20824 u262144
pcpu-alloc: s89768 r8192 d20824 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 499748
Policy zone: DMA32
Kernel command line: initrd=initrd-pxe.img devfs=nomount
drblthincli=off selinux=0 nomodeset     BOOT_IMAGE=vmlinuz-pxe
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 1964784k/2027516k available (4435k kernel code, 392k absent,
62340k reserved, 7432k data, 920k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:16640 nr_irqs:472
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 20971520 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1994.745 MHz processor.
Calibrating delay loop (skipped), value calculated using timer
frequency.. 3989.49 BogoMIPS (lpj=1994745)
Security Framework initialized
SELinux:  Disabled at boot.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
ACPI: Core revision 20100121
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 20496 entries in 81 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Celeron(R) CPU        E1400  @ 2.00GHz stepping 0d
Booting Node   0, Processors  #1
Brought up 2 CPUs
Total of 2 processors activated (7979.29 BogoMIPS).
sizeof(vma)=184 bytes
sizeof(page)=56 bytes
sizeof(inode)=584 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=6000 bytes
devtmpfs: initialized
Time:  2:28:51  Date: 09/09/10
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Warning: Incorrect checksum in table [TCPA] - 00, should be 7F
(20100121/tbutils-314)
ACPI: ACPI Dock Station Driver: 1 docks/bays found
PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000effff]
pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff]
pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfec00000]
pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xdfffffff]
pci_root PNP0A03:00: host bridge window [mem 0xff980000-0xff980fff]
pci_root PNP0A03:00: host bridge window [mem 0xff97c000-0xff97ffff]
pci_root PNP0A03:00: host bridge window [mem 0xfed20000-0xfed9ffff]
pci_root PNP0A03:00: host bridge window [mem 0xfeda7000-0xfeda7fff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: reg 10: [mem 0xfe800000-0xfebfffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io  0xec90-0xec97]
pci 0000:00:02.1: reg 10: [mem 0xfe700000-0xfe7fffff 64bit]
pci 0000:00:03.0: reg 10: [mem 0xfeda6000-0xfeda600f 64bit]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.2: reg 10: [io  0xfe80-0xfe87]
pci 0000:00:03.2: reg 14: [io  0xfe90-0xfe93]
pci 0000:00:03.2: reg 18: [io  0xfea0-0xfea7]
pci 0000:00:03.2: reg 1c: [io  0xfeb0-0xfeb3]
pci 0000:00:03.2: reg 20: [io  0xfef0-0xfeff]
pci 0000:00:03.3: reg 10: [io  0xec98-0xec9f]
pci 0000:00:03.3: reg 14: [mem 0xfe6d8000-0xfe6d8fff]
pci 0000:00:19.0: reg 10: [mem 0xfe6e0000-0xfe6fffff]
pci 0000:00:19.0: reg 14: [mem 0xfe6d9000-0xfe6d9fff]
pci 0000:00:19.0: reg 18: [io  0xecc0-0xecdf]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io  0xff20-0xff3f]
pci 0000:00:1a.1: reg 20: [io  0xff00-0xff1f]
pci 0000:00:1a.2: reg 20: [io  0xfc00-0xfc1f]
pci 0000:00:1a.7: reg 10: [mem 0xfe6da000-0xfe6da3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xfe6dc000-0xfe6dffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0xff80-0xff9f]
pci 0000:00:1d.1: reg 20: [io  0xff60-0xff7f]
pci 0000:00:1d.2: reg 20: [io  0xff40-0xff5f]
pci 0000:00:1d.7: reg 10: [mem 0xff980000-0xff9803ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io  0xfe00-0xfe07]
pci 0000:00:1f.2: reg 14: [io  0xfe10-0xfe13]
pci 0000:00:1f.2: reg 18: [io  0xfe20-0xfe27]
pci 0000:00:1f.2: reg 1c: [io  0xfe30-0xfe33]
pci 0000:00:1f.2: reg 20: [io  0xfec0-0xfecf]
pci 0000:00:1f.2: reg 24: [io  0xeca0-0xecaf]
pci 0000:00:1f.3: reg 10: [mem 0xfe6db000-0xfe6db0ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0xece0-0xecff]
pci 0000:00:1f.5: reg 10: [io  0xfe40-0xfe47]
pci 0000:00:1f.5: reg 14: [io  0xfe50-0xfe53]
pci 0000:00:1f.5: reg 18: [io  0xfe60-0xfe67]
pci 0000:00:1f.5: reg 1c: [io  0xfe70-0xfe73]
pci 0000:00:1f.5: reg 20: [io  0xfed0-0xfedf]
pci 0000:00:1f.5: reg 24: [io  0xecb0-0xecbf]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:01.0:   bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.0:   bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.1:   bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000effff]
(subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff]
(subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfec00000]
(subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xdfffffff]
(subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xff980000-0xff980fff]
(subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xff97c000-0xff97ffff]
(subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfed20000-0xfed9ffff]
(subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xfeda7000-0xfeda7fff]
(subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI Warning for \_SB_.PCI0.PCI2._PRT: Return Package has no elements
(empty) (20100121/nspredef-456)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:03.0: no compatible bridge window for [mem
0xfeda6000-0xfeda600f 64bit]
Expanded resource reserved due to conflict with PCI Bus 0000:00
reserve RAM buffer: 000000000009f800 - 000000000009ffff
reserve RAM buffer: 000000007bbffc00 - 000000007bffffff
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
  alloc irq_desc for 24 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 25 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 26 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 27 on node 0
  alloc kstat_irqs on node 0
  alloc irq_desc for 28 on node 0
  alloc kstat_irqs on node 0
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 24 for MSI
hpet: hpet3 irq 25 for MSI
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io  0x0800-0x085f] has been reserved
system 00:01: [io  0x0c00-0x0c7f] has been reserved
system 00:01: [io  0x0860-0x08ff] has been reserved
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.1: BAR 13: assigned [io  0x2000-0x2fff]
pci 0000:00:03.0: BAR 0: assigned [mem 0xf0400000-0xf040000f 64bit]
pci 0000:00:03.0: BAR 0: set to [mem 0xf0400000-0xf040000f 64bit] (PCI
address [0xf0400000-0xf040000f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  disabled]
pci 0000:00:01.0:   bridge window [mem 0xfe500000-0xfe5fffff]
pci 0000:00:01.0:   bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.1:   bridge window [mem 0xfe300000-0xfe3fffff]
pci 0000:00:1c.1:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 04-04]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff]
pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfec00000]
pci_bus 0000:00: resource 10 [mem 0x80000000-0xdfffffff]
pci_bus 0000:00: resource 11 [mem 0xff980000-0xff980fff]
pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff]
pci_bus 0000:00: resource 13 [mem 0xfed20000-0xfed9ffff]
pci_bus 0000:00: resource 14 [mem 0xfeda7000-0xfeda7fff]
pci_bus 0000:01: resource 1 [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xfe400000-0xfe4fffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0xfe300000-0xfe3fffff]
pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000effff]
pci_bus 0000:04: resource 8 [mem 0x000f0000-0x000fffff]
pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfec00000]
pci_bus 0000:04: resource 10 [mem 0x80000000-0xdfffffff]
pci_bus 0000:04: resource 11 [mem 0xff980000-0xff980fff]
pci_bus 0000:04: resource 12 [mem 0xff97c000-0xff97ffff]
pci_bus 0000:04: resource 13 [mem 0xfed20000-0xfed9ffff]
pci_bus 0000:04: resource 14 [mem 0xfeda7000-0xfeda7fff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17976k freed
Simple Boot Flag at 0x7a set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1283999332.780:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 3872
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
  alloc irq_desc for 29 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 29 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 30 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 30 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
  alloc irq_desc for 31 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.1: irq 31 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [VBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
agpgart-intel 0000:00:00.0: detected 32764K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
0000:00:03.3: ttyS1 at I/O 0xec98 (irq = 17) is a 16550A
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
ata_piix 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 18
ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 18
ata_piix 0000:00:1f.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 18
ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 18
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  alloc irq_desc for 22 on node -1
  alloc kstat_irqs on node -1
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe6da000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.34.6-47.fc13.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
  alloc irq_desc for 23 on node -1
  alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.34.6-47.fc13.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.34.6-47.fc13.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.34.6-47.fc13.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.34.6-47.fc13.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.34.6-47.fc13.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.34.6-47.fc13.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.34.6-47.fc13.x86_64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@xxxxxxxxxx
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
  Magic number: 10:827:459
rtc_cmos 00:05: setting system clock to 2010-09-09 02:28:54 UTC (1283999334)
Initalizing network drop monitor service
ata3: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 4 SControl 300)
ata2.00: SATA link down (SStatus 4 SControl 300)
ata2.01: SATA link down (SStatus 4 SControl 300)
usb 4-1: new low speed USB device using uhci_hcd and address 2
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 4 SControl 300)
ata1.00: ATA-7: ST380815AS, 4.ADA, max UDMA/133
ata1.00: 156250000 sectors, multi 8: LBA48 NCQ (depth 0/32)
usb 4-1: New USB device found, idVendor=0461, idProduct=4d22
usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 4-1: Product: USB Optical Mouse
input: USB Optical Mouse as
/devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input2
generic-usb 0003:0461:4D22.0001: input,hidraw0: USB HID v1.11 Mouse
[USB Optical Mouse] on usb-0000:00:1a.1-1/input0
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST380815AS       4.AD PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 920k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 1688k freed
Freeing unused kernel memory: 1948k freed
usb 4-2: new low speed USB device using uhci_hcd and address 3
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
  alloc irq_desc for 21 on node -1
  alloc kstat_irqs on node -1
e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
e1000e 0000:00:19.0: setting latency timer to 64
  alloc irq_desc for 32 on node -1
  alloc kstat_irqs on node -1
e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
usb 4-2: New USB device found, idVendor=413c, idProduct=2105
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: Dell USB Keyboard
usb 4-2: Manufacturer: Dell
input: Dell Dell USB Keyboard as
/devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input3
generic-usb 0003:413C:2105.0002: input,hidraw1: USB HID v1.10 Keyboard
[Dell Dell USB Keyboard] on usb-0000:00:1a.1-2/input0
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:23:ae:9f:23:2d
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: 8021ff-0ff
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
e1000e 0000:00:19.0: irq 32 for MSI/MSI-X
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
0000:00:19.0: eth0: 10/100 speed: disabling TSO
iTCO_vendor_support: vendor-support=0
microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa3
microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa3
microcode: Microcode Update Driver: v2.00
<tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH10D TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pata_acpi 0000:00:03.2: setting latency timer to 64
pata_acpi 0000:00:03.2: PCI INT C disabled
ACPI: WMI: Mapper loaded
input: Dell WMI hotkeys as /devices/virtual/input/input4
[drm] Initialized drm 1.1.0 20060810
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
ppdev: user-space parallel port driver
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
  alloc irq_desc for 33 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:02.0: irq 33 for MSI/MSI-X
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  alloc irq_desc for 34 on node -1
  alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: irq 34 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
vboxdrv: counter framework which can generate NMIs is active. You have
to prevent
vboxdrv: the usage of hardware performance counters by
vboxdrv:   echo 2 > /proc/sys/kernel/perf_counter_paranoid
vboxdrv: Found 2 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa02dc1c0
vboxdrv: fAsync=0 offMin=0x262 offMax=0x1b12
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.2.6_OSE (interface 0x00140001).


-- 
Robert Arkiletian
Eric Hamber Secondary, Vancouver, Canada
-- 
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines


[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux