Re: eSATA removable drive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



| From: D. Hugh Redelmeier <hugh@xxxxxxxxxx>
| Date: Tue, 6 Apr 2010 15:23:17 -0400 (EDT)

This is a bit old.  Here's the start of thread in the archives: 
 <http://lists.fedoraproject.org/pipermail/users/2010-April/370236.html>

| I have an eSATA external hard drive case.  I want to hotplug / unplug it.
| 
| My system is Fedora 11.

I've since upgraded for Fedora 13.  I still have this problem.

| I added an external eSATA port on my desktop computer by adding a bracket 
| (with an internal cable connected to one of the ordinary SATA sockets on 
| the motherboard.)
| 
| The SATA controller is an intel ICH9R.  To make hotplug work, I needed
| to go the computer's BIOS and change the SATA mode to AHCI (it was
| IDE).
| 
| I can now hotplug the drive.
| 
| I cannot unplug the drive.  If I tell the system to eject the drive,
| it complains:
| 
|     # eject /dev/sdi
|     eject: device "/dev/sdi" doesn't have a removable or hotpluggable flag
|     # cat /sys/block/sdi/removable 
|     0
| (I don't know where or what a hotpluggable flag is.)

| My guess is some kind of HAL rule but I'm not an initiate.  Maybe
| something in here would work:
|   <http://www.thinkwiki.org/wiki/How_to_hotswap_UltraBay_devices>

I still don't know, but lshal(1) tells me a bit:

	udi = '/org/freedesktop/Hal/devices/storage_serial_ST31500341AS_9VS0N5K1'
	  block.device = '/dev/sdi'  (string)
	  block.is_volume = false  (bool)
	  block.major = 8  (0x8)  (int)
	  block.minor = 128  (0x80)  (int)
	  block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_ST31500341AS_9VS0N5K1'  (string)
	  info.capabilities = {'storage', 'block'} (string list)
	  info.category = 'storage'  (string)
	  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2922_scsi_host_5_scsi_device_lun0'  (string)
	  info.product = 'ST31500341AS'  (string)
	  info.udi = '/org/freedesktop/Hal/devices/storage_serial_ST31500341AS_9VS0N5K1'  (string)
	  info.vendor = 'ATA'  (string)
	  linux.hotplug_type = 3  (0x3)  (int)
	  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1f.2/host4/target4:0:0/4:0:0:0/block/sdi'  (string)
	  storage.automount_enabled_hint = true  (bool)
	  storage.bus = 'pci'  (string)
	  storage.drive_type = 'disk'  (string)
	  storage.firmware_version = 'CC1J'  (string)
=>	  storage.hotpluggable = false  (bool)
	  storage.lun = 0  (0x0)  (int)
	  storage.media_check_enabled = false  (bool)
	  storage.model = 'ST31500341AS'  (string)
	  storage.no_partitions_hint = false  (bool)
	  storage.originating_device = '/org/freedesktop/Hal/devices/computer'  (string)
	  storage.partitioning_scheme = 'mbr'  (string)
=>	  storage.removable = false  (bool)
	  storage.removable.media_available = true  (bool)
	  storage.removable.media_size = 1500301910016  (0x15d50f66000)  (uint64)
=>	  storage.requires_eject = false  (bool)
	  storage.serial = 'ST31500341AS_9VS0N5K1'  (string)
	  storage.size = 1500301910016  (0x15d50f66000)  (uint64)
	  storage.vendor = 'ATA'  (string)

All those marked settings look wrong to me.  I guess HAL rules could
fix this.  Surely I'm not the first to hit this problem.
-- 
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines


[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux