2009/12/31 Randy Yates <yates@xxxxxxxx>
Doh! Sorry Mohamed - ignore my previous response - it was from my> 2009/12/31 Randy Yates <yates@xxxxxxxx>
>
>> I have a laptop with a working bcm4311 wireless adaptor, but I don't
>> know which packages were installed to get it working. Any ideas on
>> how to determine this? Fedora 11.
>> --
>> Randy Yates % "...the answer lies within your soul
>> Digital Signal Labs % 'cause no one knows which side
>> mailto://yates@xxxxxxxx % the coin will fall."
>> http://www.digitalsignallabs.com % 'Big Wheels', *Out of the Blue*, ELO
>>
>> --
>> fedora-list mailing list
>> fedora-list@xxxxxxxxxx
>> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>> Guidelines:
>> http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
>>
>
> Hi,
>
> it is likely that the module used by your card is the b43 one, provided by
> the kernel.
> But this module requires also a firmware.
> Anyway I think that the proprietary module wl supports also 4311 chipsets.
> Did you installed some third-party drivers?
> What return the following commands ?
> lsmod | egrep "b43|wl"
> rpm -qa \*kmod\* \*firmware
> lspci -k
desktop machine (the one on which I'm writing these emails) and NOT the
laptop!
The responses from the laptop are below:
[yates@localhost ~]$ lsmod | egrep "b43|wl"
b43 128888 0
rfkill 11284 3 rfkill_input,b43
mac80211 214264 1 b43
cfg80211 62472 2 b43,mac80211
input_polldev 4128 1 b43
ssb 43600 1 b43
[yates@localhost ~]$ rpm -qa \*kmod\* \*firmware
libertas-usb8388-firmware-5.110.22.p23-2.fc11.noarch
kmodtool-1-18.fc11.noarch
ql2200-firmware-2.02.08-2.fc11.noarch
rt73usb-firmware-1.8-5.noarch
atmel-firmware-1.3-5.noarchkmod-ndiswrapper-2.6.30.9-102.fc11.x86_64-1.54-4.fc11.8.x86_64
rt61pci-firmware-1.2-5.noarch
ql2400-firmware-4.04.09-1.fc11.noarchkmod-ndiswrapper-2.6.30.5-43.fc11.x86_64-1.54-4.fc11.17.x86_64
ql23xx-firmware-3.03.27-2.fc11.noarchakmod-ndiswrapper-1.54-4.fc11.8.x86_64
akmods-0.3.6-3.fc11.noarch
iwl4965-firmware-228.61.2.24-1.fc11.noarch
ipw2200-firmware-3.1-2.noarch
ipw2100-firmware-1.3-9.noarchkmod-ndiswrapper-2.6.30.9-96.fc11.x86_64-1.54-4.fc11.20.x86_64
kernel-firmware-2.6.30.9-102.fc11.noarch
zd1211-firmware-1.4-2.noarch
iwl5000-firmware-8.24.2.12-1.fc11.noarch
ql2100-firmware-1.19.38-2.fc11.noarch
iwl3945-firmware-15.32.2.9-1.fc11.noarch[yates@localhost ~]$ lspci -k
00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
Subsystem: Hewlett-Packard Company Device 30cf
00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2)
Subsystem: Hewlett-Packard Company Device 30cf
00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2)
Subsystem: Hewlett-Packard Company Device 30cf
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00:01.2 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
Subsystem: Hewlett-Packard Company Device 30cf
00:01.3 Co-processor: nVidia Corporation MCP67 Co-processor (rev a2)
Subsystem: Hewlett-Packard Company Device 30cf
00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
Subsystem: Hewlett-Packard Company Device 30cf
Kernel driver in use: ohci_hcd00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
Subsystem: Hewlett-Packard Company Device 30cf
Kernel driver in use: ehci_hcd00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
Subsystem: Hewlett-Packard Company Device 30cf
Kernel driver in use: ohci_hcd00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
Subsystem: Hewlett-Packard Company Device 30cf
Kernel driver in use: ehci_hcd00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1)
Subsystem: Hewlett-Packard Company Device 30cf
Kernel driver in use: pata_amd
Kernel modules: ata_generic, pata_acpi, pata_amd
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
Subsystem: Hewlett-Packard Company Device 30cf
Kernel driver in use: HDA Intel00:08.0 PCI bridge: nVidia Corporation MCP67 PCI Bridge (rev a2)
Kernel modules: snd-hda-intel
00:09.0 IDE interface: nVidia Corporation MCP67 AHCI Controller (rev a2)
Subsystem: Hewlett-Packard Company Device 30cf
Kernel driver in use: ahci
Kernel modules: ata_generic, pata_acpi00:0a.0 Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2)
Subsystem: Hewlett-Packard Company Device 30cf
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:0c.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
Kernel driver in use: pcieport-driver00:0d.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
Kernel modules: shpchp
Kernel driver in use: pcieport-driver00:12.0 VGA compatible controller: nVidia Corporation GeForce 7150M (rev a2)
Kernel modules: shpchp
Subsystem: Hewlett-Packard Company Device 30cf
Kernel modules: nouveau, nvidiafb
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Kernel driver in use: k8temp
Kernel modules: k8temp
02:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
Subsystem: Hewlett-Packard Company Device 30cf
Kernel driver in use: firewire_ohci02:05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
Kernel modules: firewire-ohci
Subsystem: Hewlett-Packard Company Device 30cf
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci
02:05.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
Subsystem: Hewlett-Packard Company Device 30cf
Kernel driver in use: ricoh-mmc
Kernel modules: ricoh_mmc
02:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
Subsystem: Hewlett-Packard Company Device 30cf
02:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
03:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 02)
Subsystem: Hewlett-Packard Company BCM4311 802.11b/g Wireless LAN Controller
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
--
Randy Yates % "I met someone who looks alot like you,
Digital Signal Labs % she does the things you do,
mailto://yates@xxxxxxxx % but she is an IBM."
http://www.digitalsignallabs.com % 'Yours Truly, 2095', *Time*, ELO
--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
No problem ^^
I was first surprised that there was no Broadcom device in your first lspci output, but now it's OK.
The native kernel driver b43 is the one used by your card. But as I said before, it needs firmwares. Did you installed these firmwares manually (using b43-fwcutter for example)?
There is a set of free/open source firmwares for Broadcom (package b43-openfwwf) but there aren't supported by 4311 (rev 2) devices according to their page.
What returns this command?
$ rpm -qf /lib/firmware/b43/*
-- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines