Re: F11: NetworkManager woes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/15/2009 06:54 PM, lanas wrote:
A sincere thanks to all who took the time to reply on my previous
queries.

Do not get me wrong, I really am 95% satisfied with F11.  And that's
after doing a F9 to F8 'upgrade', and rejecting altogether F10.  I'm
really up to getting F11 (x86_64) both at work and at home.

And so far so good, but...

Here's what's up with that thing called NetworkManager.

When I right-click on the NetworkManager applet icon and edit the
connections (eth0 and eth1) all parameters are A-1 OK.  eth0 through
DHCP, eth1 static.  But no matter what I do, the NetworkManager
craplet will initialize eth0 to 192.168.10.110/24 and will do nothing
with eth1.  It will also initialize resolv.conf to:

You should also add netmask and gateway and DNS entries into the NM applet.

I have done this with complete success, and here is what happens:

I turn on the system from a cold start. NM is doing its thing or already has -- I LEFT click the applet and choose my work config. Poof, all is well.

Yes, I need to do that every time the system boot at work, but my main system is a laptop, and so it is appropriate that I run NM.

If you are NOT a laptop, then please, please follow the advice already given and simply revert to NM off and network services on.

If you really want to make NM do all the right things, then tell it so in /etc/sysconfig/network-scripts/ifcfg-eth[0-N]. Those files will always have precedence, and you can even tell NM to just use these files as is. You can put DNS in there too, so that network services will create for you exactly the resolv.conf you want.

You may have noticed that there are now two network administration applications: Network -- Network Device Control

Network is the old one, and is used with the old network scripts. Network Device Control understands the additional syntax for the ifcfg scripts to work with Network Manager. Give that one a play and see what it does to the config files: /etc/sysconfig/network-scripts/ifcfg-eth[0-N]

Good Luck!

--
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines

[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux