I got my Nvidia card installed correctly by following these instructions at rpmfusion: > Fedora 10 and 11 > > Please remember that once the drivers are installed, they will configure > your xorg.conf automatically and changes will take effect after a full > reboot. There is no need to run nvidia-xconfig or other tools. > > GeForce 6 and higher (mine is a 9400 GT) > > yum install kmod-nvidia > > Fedora 11 and nouveau > > As nouveau is enabled by default starting with Fedora 11, you may > experience problem which is caused by the nouveau kernel module being > present in the initrd image. To avoid such problem, after you have > installed the right series of the nvidia driver for your hardware, execute > the following commands: > > su - > mv /boot/initrd-$(uname -r).img /boot/initrd-$(uname -r)-nouveau.img > mkinitrd /boot/initrd-$(uname -r).img $(uname -r) > reboot > > http://rpmfusion.org/Howto/nVidia > > ---------------------------------- > > Before reboot, the following command: > > lsmod | grep nouveau > > has this output (at least for teh 9400 GT card): > > nouveau 472800 0 > drm 208060 1 nouveau > i2c_algo_bit 6020 1 nouveau > i2c_core 22288 5 nvidia,i2c_piix4,nouveau,drm,i2c_algo_bit > > After reboot, there is no output whereas: > > lsmod | grep nvidia > > gives: > > nvidia 10260024 26 > i2c_core 22240 2 i2c_piix4,nvidia > > The Nvidia driver is installed! -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
