Re: lvm

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Patrick Dupre wrote:
Hello,

I duplicate an hard drive to another one with logical partition.
I kept the / on a standard partition, put the /usr on /dev/VG1/usr, etc...
When I mount the logical partitions I do  experience any problem but when
I boot the machine on the logical partition I get an error from the
/etc/fstab.

How did you duplicate the drive?
cp -a (I used to do it that way).

fsck complains
The superblock could not be read or does not describe a correct ext2
 filesystem.  If the device is valid and it really contains an ext2
 filesystem (and not swap or ufs or something else), then the superblock
 is corrupt, and you might try running e2fsck with an alternate superblock:
     e2fsck -b 8193 <device>

I am using grub,

In the fstab I put:
/dev/VG1/usr    /usr

Please post your entire /etc/fstab.

/dev/sdc5               /               ext3    defaults        1 1
/dev/mapper/VG1-usr     /usr            ext3    defaults        1 2
/dev/VG1/usr_lib       /usr/lib        ext3    defaults        1 2
/dev/VG1/usr_local     /usr/local      ext3    defaults        1 2
/dev/VG1/usr_src       /usr/src        ext3    defaults        1 2
/dev/VG1/tmp           /tmp            ext3    defaults        1 2
/dev/VG1/home          /home           ext3    defaults        1 2
#/dev/VG1/backup       /backup         ext3    defaults        1 2
/dev/VG1/iso_image     /iso-image      ext3    defaults        1 2
tmpfs                   /dev/shm        tmpfs   defaults        0 0
devpts                  /dev/pts        devpts  gid=5,mode=620  0 0
sysfs                   /sys            sysfs   defaults        0 0
proc                    /proc           proc    defaults        0 0
/dev/sdc1               swap            swap    defaults        0 0
/dev/fd0                /mnt/floppy      msdos,auto      noauto,user,umask=0 0 0

I did try /dev/VG1 and /dev/mapper with the same result.

I looks like that the logical partitions are not recognize by fsck, but it
works fine when I do the same from a properly boot disk.

fsck works find with LVM. I suspect that you may may have the wrong
LV and/or VG name. You may want to run lvscan to display the names.


  ACTIVE            '/dev/VG1/usr' [7.00 GB] inherit
  ACTIVE            '/dev/VG1/usr_lib' [6.00 GB] inherit
  ACTIVE            '/dev/VG1/usr_local' [5.00 GB] inherit
  ACTIVE            '/dev/VG1/usr_src' [5.00 GB] inherit
  ACTIVE            '/dev/VG1/tmp' [2.00 GB] inherit
  ACTIVE            '/dev/VG1/home' [9.00 GB] inherit
  ACTIVE            '/dev/VG1/backup' [9.00 GB] inherit
  ACTIVE            '/dev/VG1/iso_image' [10.00 GB] inherit

When I boot from the working disk.

Some ideas ?

Regards

--
---
==========================================================================
 Patrick DUPRÉ                      |   |
 Department of Chemistry            |   |    Phone: (44)-(0)-1904-434384
 The University of York             |   |    Fax:   (44)-(0)-1904-432516
 Heslington                         |   |
 York YO10 5DD  United Kingdom      |   |    email: pd520@xxxxxxxxxx
==========================================================================
-- 
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines

[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux