Re: How to talk ethernet to windows

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>>>>> "Kevin" == Kevin Martin <kevintm@xxxxxxxxxxxxx> writes:

    Kevin> Colin Paul Adams wrote:
    >> I have a fedora 9 box which is connected to my wireless network
    >> (via network manager).
    >> 
    >> It also has an ethernet port, and there is a windows xp
    >> professional box in the same room with an ethernet port too. I
    >> have a cable to connect the two boxes together.
    >> 
    >> So I want to set up a lan with the linux end addressed as
    >> 10.0.0.1 and the windows end addressed as 10.0.0.2, and a
    >> netmask of 255.255.255.0. And for the windows box to be able to
    >> connect to the internet by routing through to the linux box,
    >> and thence through to the wireless network.
    >> 
    >> How do I configure the two boxes to do this?
    >> 
    Kevin> Are you asking *how* to setup the static addresses for the
    Kevin> interfaces and then the routing, or just the routing?  If

Both, really.

    Kevin> it's just the routing, on the windows box (from a cmd.exe
    Kevin> window) do a "route -p add net 0.0.0.0 mask 255.255.255.0
    Kevin> 10.0.0.1" (that will setup the static route to route
    Kevin> everything thru the Linux ip address and save it for future

It doesn't. It responds with:

Bad destination address net

    Kevin> traffic, and you'll need to setup ip forwarding in
    Kevin> /proc/sys/net/ipv4/ip_forward.  

How do I do that?

    Kevin> As to setting up the static routes, in Windows the easiest way to do it is with the
    Kevin> Networking gui,

I thought that was what the above command was supposed to do. What
else do I need to do?
P.S. It is Chinese-language Windows (for my wife - I wouldn't dream of
using windows myself), and I can't read Chinese, so I have to get her
to translate, and she doesn't understand computer technical terms.
So command lines would be easier for me.

    Kevin>  in linux you can use Network Manager (yuk)
    Kevin> or set it up in the /etc/sysconfig/networking and
    Kevin> /etc/sysconfig/networking-scripts area.

What needs setting up?
-- 
Colin Adams
Preston Lancashire

-- 
fedora-list mailing list
fedora-list@xxxxxxxxxx
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines

[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux