Olteanu Eugen wrote:
I dont get it! Why would udev rename/change the name
of swap???
As for the nics.. check if there is any interrupt on your main board.
cat /proc/interrupts
How many NICs with your motherboard ?
On Thu, Oct 2, 2008 at 2:36 PM, <edwardspl@xxxxxxxxxx>
wrote:
Hello
to you,
Would you mind to help as the following questions ?
1, How to modify /etc/udev/rules.d/70-persistent-net.rules, then prevent
the udev service to change ( rename / swap ) the name of device ( eg :
eth?? ) ?
# This file was automatically generated by the /lib/udev/write_net_rules
# program run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single line.
# Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rule written by
anaconda)
SUBSYSTEM=="net", ACTION="" DRIVERS=="?*",
ATTR{address}=="10:e0:8c:39:8f:48", ATTR{type}=="1", KERNEL=="eth*",
NAME="eth2"
# Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rule written by
anaconda)
SUBSYSTEM=="net", ACTION="" DRIVERS=="?*",
ATTR{address}=="00:02:44:6c:66:49", ATTR{type}=="1", KERNEL=="eth*",
NAME="eth1"
# Realtek Semiconductor Co., Ltd. RTL8111/8168B
PCI Express Gigabit
Ethernet controller (rule written by anaconda)
SUBSYSTEM=="net", ACTION="" DRIVERS=="?*",
ATTR{address}=="00:1e:8c:7e:2f:58", ATTR{type}=="1", KERNEL=="eth*",
NAME="eth0"
2, After FC9 version, how to modify ( update ) the NIC config ( driver )
in text mode ?
( eg : Due to the current NIC just bad, so replace with another new one,
or add one more NIC for controling another network segment )
3, During the installation of FC, without which items, then the services
of NetworkManager won't be installed ?
Thanks
Edward.
For the point of 2 and 3, any suggestion / solution for me ?
Thanks !
Edward.
|
