On Wed, Jun 11, 2008 at 6:36 PM, Patrick O'Callaghan <pocallaghan@xxxxxxxxx> wrote: > On Wed, 2008-06-11 at 17:02 -0500, Aaron Konstam wrote: >> On Wed, 2008-06-11 at 16:23 +0100, Paul Smith wrote: >> > On Wed, Jun 11, 2008 at 4:18 PM, Mark Haney <mhaney@xxxxxxxxxxxxxxxx> wrote: >> > >> In the output below, where should I look for the CPU temperature? The >> > >> value >> > >> >> > >> CPU Temp: -2.0°C (low = +127.0°C, high = +127.0°C) sensor = >> > >> transistor >> > >> >> > >> seems unlikely. Or is -2.0°C realistic? >> > >> >> > >> Is there some other program to check the CPU temperature? >> > >> >> > > cat /proc/acpi/thermal_zone/THRM/temperature >> > > Sorry I do not have an anwer for you, but do have a couple clues. Here is a link to someone else's solution for a different gigabyte motherboard that has offset of -15C for the temperature readings. http://www.lm-sensors.org/ticket/2139 - It includes the details of how they edited /etc/sensors.conf You probably have to do something similar. Since you get a reading from the bios your should be able to alter sensors.conf and run sensors -s until you get a reading that is close to what the bios says. Found this on the lm-sensors site that may also apply to your system: http://www.lm-sensors.org/wiki/iwizard/WrongTemps > There is *nothing* in /proc/acpi/thermal_zone on my machine, it's a > completely empty directory. I take it the OP's system is the same. > My system is the same, that dir is empty. I found a little perl program on http://khali.linux-fr.org/devel/lm-sensors/ that didn't work on my system, but provided a clue. That program attempted to read a directory that also didn't exiost on my system (/sys/class/hwmon/hwmon1/device), I found a similar directory, but it didn't have files that matched the names in the program. I did find that on my system (F7) there is a directory (/sys/class/hwmon/hwmon0/device) that has a couple files called temp1_input and temp2_input. I wrote a perl program to read those files every five seconds and print the results. The values track perfectly with the output of the gnome sensors applet. Well, the values are 1000 X the celsius temperature, but the values divided by 1000 exactly match the temp shown by the applet. Mike -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
