2008/5/22 James Corteciano <linux@xxxxxxxxxxxxxxxxx>: > Hi Paul, > > My LCD Philips is only capable of 1280x768 @ 60Hz. I try to change the > resolution of the laptop to 1024x768 and after restarting both two LCD were > working. But I've noticed the screen resolution of the laptop was turn into > big / larger width unlike before which is fit resolution (1024x768 default > without hooking up the external Philips LCD monitor). > > Here's the output from xrandr command. > > Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1600 x 1600 > VGA connected 1024x768+0+0 (normal left inverted right x axis y axis) 370mm > x 221mm > 1024x768 75.1*+ 75.0 70.1 60.0 > 1280x768 60.0 + > 1600x1024 60.2 > 1440x900 59.9 > 1280x960 60.0 > 1360x768 59.8 60.0 > 1152x864 70.0 60.0 > 1280x720 60.0 > 832x624 74.6 > 800x600 72.2 75.0 60.3 56.2 > 640x480 75.0 72.8 72.8 75.0 66.7 60.0 > 59.9 > 720x400 70.1 > LVDS connected 1024x768+0+0 (normal left inverted right x axis y axis) 300mm > x 190mm > 1024x768 60.0*+ > 1280x800 59.9 + > 800x600 60.3 > 640x480 59.9 > TV disconnected (normal left inverted right x axis y axis) > > > I try to use xrandr shown below but it's never work and I don't know how to > use it just to fix the problem. I found your message logged through google. > > xrandr --output VGA-0 --mode 1024x768 --output LVDS-0 --mode1024x768 > --left-of VGA-0 > > and nothing happens. > > -james > > You should look more closely at your xrandr output. Your devices are VGA and LVDS, there is no -0 on the end of the names. I bet this would work: xrandr --output VGA --mode 1024x768 --output LVDS --mode1024x768 --left-of VGA I suppose you don't have the -0 and -1 like I do because you only have one of each type. -- Paul E. Johnson Professor, Political Science 1541 Lilac Lane, Room 504 University of Kansas -- fedora-list mailing list fedora-list@xxxxxxxxxx To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
