Why is the command below all that is needed to bring the system to
it's knees? Why doesn't the io scheduler, CFQ, which is supposed to be
all about fairness starve other processes? Example, if I open a new file
in vim, and hold down "i" while this is running it will pause the
display of new "i"s for seconds, sometimes until the dd write is
completely finished. Another example is applications like firefox,
thunderbird, xchat, and pidgin will stop refreshing for 10+ seconds.
dd if=/dev/zero of=test-file bs=2M count=2048
I understand the main difference between using oflag=direct or not
relates to if the io scheduler is used, and if the file is cached or
not. I can see this clearly by watching cached rise without
oflag=direct, stay the same with it, and go way down when I delete the
file after running dd without oflag=direct.
The system in question is running Fedora 8. It is an E6600, 4gb
memory, and 2x300gb Seagate sata drives. The drives are setup with md
raid 1, and the filesystem is ext3. But I also see this with plenty of
other systems with more cpu, less cpu, less memory, raid, and no raid.
I have tried various tweaks to sys.vm settings, tried changing the
scheduler to as or deadline. Nothing seem to get it to behave, other
than oflag=direct.
Using dd if=/dev/zero is just an easy test case. I see this when
copying large files, creating large files, and using virtualization
software that does heavy i/o on large files.
The command below seems to result in cpu idle 0 and io wait 100%. As
shown by "vmstat 1"
dd if=/dev/zero of=test-file bs=2M count=2048
2048+0 records in
2048+0 records out
4294967296 bytes (4.3 GB) copied, 94.7903 s, 45.3 MB/s
The command below seems to work much better for responsiveness. The
cpu idle will be around 50, and the io wait will be around 50.
dd if=/dev/zero of=test-file2 bs=2M count=2048 oflag=direct
2048+0 records in
2048+0 records out
4294967296 bytes (4.3 GB) copied, 115.733 s, 37.1 MB/s
