Timothy Murphy wrote:
Mark LaPierre wrote:
Well, it's been 24 hours and no reply. Am I asking too hard a
question? Maybe I should post this to a different list?
You could try "sudo smartctl -a /dev/sdb".
Thank you for the idea. I waited for the drive to go bonkers again
before messing with it. This is what it looked like in /var/log/messages
Feb 29 19:27:01 mushroom pulseaudio[2736]: main.c:
setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
Feb 29 19:27:01 mushroom pulseaudio[2736]: main.c:
setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
Feb 29 19:27:01 mushroom pulseaudio[2736]: alsa-util.c: Device (null)
doesn't support 44100 Hz, changed to 48000 Hz.
Feb 29 19:27:02 mushroom gconfd (mlapier-2728): Resolved address
"xml:readwrite:/home/mlapier/.gconf" to a writable configuration source
at position 0
Mar 1 00:28:34 mushroom yum-updatesd-helper: error getting update info:
failure: repodata/comps-f8.xml from updates: [Errno 256] No more mirrors
to try.
Mar 1 00:55:31 mushroom kernel: ata3.01: exception Emask 0x0 SAct 0x0
SErr 0x0 action 0x2 frozen
Mar 1 00:55:31 mushroom kernel: ata3.01: cmd
a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x1e data 0
Mar 1 00:55:31 mushroom kernel: res 40/00:03:00:00:20/00:00:00:00:00/b0
Emask 0x4 (timeout)
Mar 1 00:55:31 mushroom kernel: ata3: soft resetting port
Mar 1 00:55:56 mushroom gconfd (mlapier-2728): Exiting
Mar 1 00:56:01 mushroom kernel: agpgart: Found an AGP 3.0 compliant
device at 0000:00:00.0.
Mar 1 00:56:01 mushroom kernel: agpgart: X tried to set rate=x12.
Setting to AGP3 x8 mode.
Mar 1 00:56:01 mushroom kernel: agpgart: Putting AGP V3 device at
0000:00:00.0 into 8x mode
Mar 1 00:56:01 mushroom kernel: agpgart: Putting AGP V3 device at
0000:01:00.0 into 8x mode
Mar 1 00:56:01 mushroom kernel: irq 16: nobody cared (try booting with
the "irqpoll" option)
Mar 1 00:56:01 mushroom kernel:
Mar 1 00:56:01 mushroom kernel: Call Trace:
Mar 1 00:56:01 mushroom kernel: <IRQ> [<ffffffff8106aa4f>]
__report_bad_irq+0x30/0x72
Mar 1 00:56:01 mushroom kernel: [<ffffffff8106aca0>]
note_interrupt+0x20f/0x253
Mar 1 00:56:01 mushroom kernel: [<ffffffff8106b58c>]
handle_fasteoi_irq+0xa9/0xd1
Mar 1 00:56:01 mushroom kernel: [<ffffffff8100e0fc>] do_IRQ+0xf1/0x161
Mar 1 00:56:01 mushroom kernel: [<ffffffff8100adba>] default_idle+0x0/0x3d
Mar 1 00:56:01 mushroom kernel: [<ffffffff8100c0e1>] ret_from_intr+0x0/0xa
Mar 1 00:56:01 mushroom kernel: <EOI> [<ffffffff8100ade3>]
default_idle+0x29/0x3d
Mar 1 00:56:01 mushroom kernel: [<ffffffff8100ae8b>] cpu_idle+0x94/0xbc
Mar 1 00:56:01 mushroom kernel: [<ffffffff81433baa>]
start_kernel+0x2cf/0x2db
Mar 1 00:56:01 mushroom kernel: [<ffffffff81433140>] _sinittext+0x140/0x144
Mar 1 00:56:01 mushroom kernel:
Mar 1 00:56:01 mushroom kernel: handlers:
Mar 1 00:56:01 mushroom kernel: [<ffffffff8831b35a>]
(via_driver_irq_handler+0x0/0x183 [via])
Mar 1 00:56:01 mushroom kernel: Disabling IRQ #16
Mar 1 00:56:02 mushroom kernel: ata3.00: qc timeout (cmd 0xef)
Mar 1 00:56:02 mushroom kernel: ata3.00: failed to IDENTIFY (SPINUP
failed, err_mask=0x4)
Mar 1 00:56:02 mushroom kernel: ata3.00: revalidation failed (errno=-5)
Mar 1 00:56:02 mushroom kernel: ata3: failed to recover some devices,
retrying in 5 secs
Mar 1 00:56:06 mushroom shutdown[3798]: shutting down for system reboot
I was tailing the messages file so I saw it drop out. I went straight to
/etc/fstab and commented out the lines that apply to the drive. Then I
rebooted the the machine.
When the machine came back up the two partitions on the drive were
mounted under /media. The two desktop icons were there on my desktop.
That's what prompted me to go look in mtab where I found the mounts.
That lead me to the question, If I have the partitions mounted under
fstab why are the icons showing up on my desktop? Is the system mounting
the partitions twice? Once under /sdb1 and /sdb2 according to the fstab
and also on /media? Maybe that's what's causing the problem.
Anyway, I set to work on the smartctl as suggested by Tim Murphey. I ran
the short test and the long test. Here's the results of that effort:
[root@mushroom ~]# smartctl -a /dev/sdb
smartctl version 5.37 [x86_64-redhat-linux-gnu] Copyright (C) 2002-6
Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: IBM/Hitachi Deskstar GXP-180 family
Device Model: IC35L090AVV207-0
Serial Number: VNVC00G3C5687G
Firmware Version: V23OA63A
User Capacity: 82,348,277,760 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 3a
Local Time is: Sat Mar 1 10:08:30 2008 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (2153) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 36) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED
RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 060 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 116 116 024 Pre-fail Always - 223 (Average 248)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 161
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 095 095 000 Old_age Always - 37120
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 161
192 Power-Off_Retract_Count 0x0032 099 099 050 Old_age Always - 1707
193 Load_Cycle_Count 0x0012 099 099 050 Old_age Always - 1707
194 Temperature_Celsius 0x0002 137 137 000 Old_age Always - 40 (Lifetime
Min/Max 11/68)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 37112 -
# 2 Short offline Completed without error 00% 37111 -
Device does not support Selective Self Tests/Logging
[root@mushroom ~]#
Someone suggested that it could be a PS problem and that I should test
the voltages. Can someone tell me what the voltage reading should be and
the allowable tolerance?
Thanks for the help guy and girls.
