On Wed, 2007-12-19 at 17:59 +0100, Luc MAIGNAN wrote: > Hi list, > > I've put an external IOMEGA usb storage disk (35 GB removable disks) > behind a F8 box. > The system seems to recognize the usb device, like the > /proc/bus/usb/devices says : > > T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=059b ProdID=0042 Rev= 8.22 > S: Manufacturer=Iomega > S: Product=USB RRD > S: SerialNumber=AC6F95CC1237 > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 4mA > I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage > E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > > > But in /dev/usb* I don't see any block device, so I don't know how to > mount it. > > Anyone has an idea ? Remember that in F8 ALL storage is treated as SCSI, so your drive will appear as /dev/sdb or /dev/sdc or something like that. "fdisk -l" as root will display all your drives. Try that. ---------------------------------------------------------------------- - Rick Stevens, Principal Engineer rstevens@xxxxxxxxxxxx - - CDN Systems, Internap, Inc. http://www.internap.com - - - - Change is inevitable, except from a vending machine. - ----------------------------------------------------------------------
