-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Lonni J Friedman a écrit : > On 12/12/07, François Patte <francois.patte@xxxxxxxxxxxxxxxxxxxxxxxx> wrote: >> -----BEGIN PGP SIGNED MESSAGE----- >> Hash: SHA1 >> >> Lonni J Friedman a écrit : >> >>>> nvidia card gives priority to "CRT", the external display, so, if you >>>>> plug an external screen/beamer, the display is on this one by default. >>> That was the case for the nvidia X driver, however never for the >>> hardware. And its no longer accurate for the driver. For many >>> notebooks, the internal DFP is given priority. >> Nvidia readme: >> >> <cite> >> >> All mobile NVIDIA chips support TwinView. TwinView on a laptop can be >> configured in the same way as on a desktop machine (please refer to >> Appendix G); note that in a TwinView configuration using the laptop's >> internal flat panel and an external CRT, the CRT is the primary display >> device (specify its HorizSync and VertRefresh in the Monitor section of >> your X config file) and the flat panel is the secondary display device >> (specify its HorizSync andVertRefresh through the SecondMonitorHorizSync >> and SecondMonitorVertRefreshoptions). >> >> </cite> > > Sure, but that quote has no relevance to what you were discussing originally. I just said that when I plug an external monitor (whatever LCD or CRT) on the VGA plug of my laptop, the display is on this external display and *not* on the LCD panel of the laptop at boot time and I have to switch the display (to LCD or LCD+CRT) using the keys (Fn-F5 on Toshiba). And it is always like this (Toshiba, Dell, Sony). But you maybe have another meaning for "primary". > >>> I'm not sure where you got this from, but its not true. >> Maybe no longer true, if your laptop is new (mine is one year old) and >> has a dvi connector. We can read in Nvidia readme: >> >> <cite> >> >> NOTE: anything attached to a 15 pin VGA connector is regarded by the >> driver as a CRT. "DFP" should only be used to refer to digital flat >> panels connected via a DVI port. >> >> </cite> > > Again, that has nothing to do with your original statement. You've > proven that you can read the README, but you apparently don't > understand it very well. I just wanted to say, using this statement (and it works like this for me since fc4), that in the xorg.conf file the values put on the line "CRT" are for the configuration of the external monitor whatever it is, LCD or CRT or beamer. You maybe have another interpretation... by experience, mine is working. - -- François Patte UFR de mathématiques et informatique Université Paris Descartes Tél. +33 (0)1 44 55 35 61 http://www.math-info.univ-paris5.fr/~patte -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iD8DBQFHYObQdE6C2dhV2JURAniNAJ0QpJCArNX2g1epTIJXNCCiIdDQ8gCgqUKa Y/vVvceh2xEiBO3AVAC/zp0= =yJTs -----END PGP SIGNATURE-----
