Bob Goodwin wrote:
John Summerfield wrote:
Bob Goodwin wrote:
http://oss.oetiker.ch/mrtg/
-----------------------------------
Can someone suggest what I need to put in the config file to view
everything happening on eth0? I have not yet put anything in config.
Ah, yes. I've been meaning to install ClarkConnect to solve this very
issue;-) Thanx for the reminder.
Here's a fairly old one:
[root@magpie root]# ls -l /etc/mrtg/mrtg.cfg
-rw-r--r-- 1 root root 754 Feb 23 2002
/etc/mrtg/mrtg.cfg
[root@magpie root]# cat /etc/mrtg/mrtg.cfg
######################################################################
# Multi Router Traffic Grapher -- Example Configuration File
######################################################################
# This file is for use with mrtg-2.0
#
# Note:
#
# * Keywords must start at the begin of a line.
#
# * Lines which follow a keyword line which do start
# with a blank are appended to the keyword line
#
# * Empty Lines are ignored
#
# * Lines starting with a # sign are comments.
# Where should the logfiles, and webpages be created?
# Minimal mrtg.cfg
#--------------------
WorkDir: /var/www/html/mrtg
#Target[r1]: 2:public@xxxxxxxxxxxxxxxxxxxxx
#MaxBytes[r1]: 1250000
#Title[r1]: Traffic Analysis
#PageTop[r1]: <H1>Stats for our Ethernet</H1>
[root@magpie root]#
Used to work, it's ages since I looked at the reports.
That's about what the config file says but the stickler is the address
"public@xxxxxxxxxxxxxxxxxxxxx"
Bob Goodwin
yeah, the system I quoted uses a genuine ADSL modem and pppoe. Probably,
we could get about the same report from it, but its default IP address
is used on a different, connected, LAN and I don't propose to fiddle
with it.
--
Cheers
John
-- spambait
1aaaaaaa@xxxxxxxxxxxxxxxx Z1aaaaaaa@xxxxxxxxxxxxxxxx
-- Advice
http://webfoot.com/advice/email.top.php
http://www.catb.org/~esr/faqs/smart-questions.html
http://support.microsoft.com/kb/555375
Please do not reply off-list
