On Wed, 2007-10-31 at 17:10 +0000, Alan Cox wrote:
> > I have. But what you have is an abstract range of numbers which apply
> > some sort of power management, but without any definition of what those
> > numbers mean, other than more or less power management. You don't get
> > something like - if the drive has been idle for five minutes, or X
> > seconds, you can get the drive to park the head.
>
> Some drives have that, some don't. Most also honour the specific timeout
> setting via hdparm -S. (-S 0 being don't stop)
>
> Alan
>
This is a very interesting thread, so I thought I'd take a look and see
what my system says and does.
System: Dell XPS M1710 laptop, about a year old, 80GB HD, running Linux
2.6.22.9-91.fc7
I set up a loop to print the last value of the "193 Load_Cycle_Count"
line from command "smartctl -d ata -a /dev/sda" once a minute this
morning. I let it run all day, and after eight hours it never changed
from 328146. I shutdown (hibernated) the system and resumed a bit later
in my home office. The loop (which just resumed right along with
everything else) now prints a constant value of 328150 once a minute.
FWIW, the loop looks like:
for whoCares in /usr/bin/*; do # easy way to loop for a few days
sudo smartctl -d ata -a /dev/sda | egrep '^[ \t]*193' | awk '{print
$NF;}';
sleep 60;
done
Also, my XPS has an option in the Bios to set the disk to run quieter
with slower access, or with faster access but a bit noisier. I might
change it from what I have it set to now and run my all-day test.
-- Mark C, Allman, PMP
-- Allman Professional Consulting, Inc.
-- www.allmanpc.com, 617-947-4263
BusinessMsg -- the secure, managed, J2EE/AJAX Enterprise IM/IC solution
