On 10/25/07, Fernando Apesteguía <fernando.apesteguia@xxxxxxxxx> wrote: > On 10/25/07, Mikkel L. Ellertson <mikkel@xxxxxxxxxxxxxxxx> wrote: > > Fernando Apesteguía wrote: > > > Hi all, > > > > > > I have a FC6 with kernel-2.6.22.9-61.fc6. Recently I compiled a new > > > kernel. Everything seemed to be working fine save the usb memory. I > > > can't mount it. > > > Before I could mount it with: > > > > > > mount /dev/sdX /mnt/usb > > > > > > but now there is no sdX device. > > > > > > This is what I see when I plug the memory: > > > > > > ------------------------------------------------ > > > Oct 25 18:31:05 hammer kernel: usb 2-1: new full speed USB device > > > using uhci_hcd and address 3 > > > Oct 25 18:31:07 hammer kernel: usb 2-1: configuration #1 chosen from 1 > > choice > > > Oct 25 18:31:07 hammer kernel: scsi1 : SCSI emulation for USB Mass > > > Storage devices > > > Oct 25 18:31:12 hammer kernel: scsi 1:0:0:0: Direct-Access > > > SigmaTel MSCN 0100 PQ: 0 ANSI: 4 > > > ------------------------------------------------ > > > > > > It seems that the memory is recognized but there is no sdX device. > > > > > > Any help here? > > > > > > Thanks in advance. > > > > > The output of lsmod would probably help. As would the config file > > you used to build the kernel. It may be that you didn't build some > > of the high-level SCSI code. I am not sure, but it looks like the > > usb_storage module is loading, but scsi_mod may not be. > > I'm sorry... ehem... this is a bit embarrasing... I forgot to add the > SCSI disk support even when it's specified that it's needed for USB > storage... > > I'm re-compiling the kernel right now :) > > Thanks > > PS: I'll confirm if that's the problem. Confirmed. That was the problem. Thank you very much > > > > > Mikkel > > -- > > > > Do not meddle in the affairs of dragons, > > for thou art crunchy and taste good with Ketchup! > > > > >
