I did a tail on the log to a file while I suspended it. There's the full
log below. Looks as if this line "Sep 12 09:29:55 localhost kernel:
Uhhuh. NMI received for unknown reason b0." might hold the answer to the
problem. I did go back to the last kernel and it still shows the same
issue, so this must be some other update. Anyone have a take on this?
I'm not fully understanding it. I know from Google'ing it's a suspend to
ram issue.
Sep 12 09:24:20 localhost ntpd[2845]: synchronized to 142.46.83.6, stratum 3
Sep 12 09:24:21 localhost NetworkManager: <info> Error getting
killswitch power: org.freedesktop.Hal.Device.KillSwitch.NotSupported -
Access type not supported
Sep 12 09:24:57 localhost last message repeated 6 times
Sep 12 09:25:46 localhost last message repeated 8 times
Sep 12 09:25:50 localhost gconfd (root-4167): GConf server is not in
use, shutting down.
Sep 12 09:25:50 localhost gconfd (root-4167): Exiting
Sep 12 09:25:52 localhost NetworkManager: <info> Error getting
killswitch power: org.freedesktop.Hal.Device.KillSwitch.NotSupported -
Access type not supported
Sep 12 09:26:28 localhost last message repeated 6 times
Sep 12 09:27:34 localhost last message repeated 11 times
Sep 12 09:28:40 localhost last message repeated 11 times
Sep 12 09:29:28 localhost last message repeated 8 times
Sep 12 09:29:32 localhost gnome-power-manager: (justin) Suspending
computer because the DBUS method Suspend() was invoked
Sep 12 09:29:33 localhost NetworkManager: <info> Going to sleep.
Sep 12 09:29:33 localhost avahi-daemon[3077]: Interface eth0.IPv6 no
longer relevant for mDNS.
Sep 12 09:29:33 localhost avahi-daemon[3077]: Leaving mDNS multicast
group on interface eth0.IPv6 with address fe80::218:8bff:fea2:425f.
Sep 12 09:29:33 localhost avahi-daemon[3077]: Interface eth0.IPv4 no
longer relevant for mDNS.
Sep 12 09:29:33 localhost avahi-daemon[3077]: Leaving mDNS multicast
group on interface eth0.IPv4 with address 159.218.3.30.
Sep 12 09:29:33 localhost NetworkManager: <info> nm-netlink-monitor.c -
nm_netlink_monitor_event_handler (724) netlink reports device wlan0 link
now 0
Sep 12 09:29:33 localhost NetworkManager: <info> nm-netlink-monitor.c -
nm_netlink_monitor_event_handler (724) netlink reports device eth0 link
now 0
Sep 12 09:29:33 localhost NetworkManager: <info>
nm-device-802-3-ethernet.c - nm_device_802_3_ethernet_link_deactivated
(149) device eth0 scheduled link_deactivated_helper
Sep 12 09:29:33 localhost NetworkManager: <info>
nm-device-802-3-ethernet.c - link_deactivated_helper (129) device eth0
will set active link to FALSE
Sep 12 09:29:33 localhost NetworkManager: <info> nm-device.c -
nm_device_set_active_link (596) device eth0 link state set to 0
Sep 12 09:29:33 localhost avahi-daemon[3077]: Withdrawing address record
for fe80::218:8bff:fea2:425f on eth0.
Sep 12 09:29:33 localhost avahi-daemon[3077]: Withdrawing address record
for 159.218.3.30 on eth0.
Sep 12 09:29:33 localhost dhclient: DHCPRELEASE on eth0 to 159.218.1.101
port 67
Sep 12 09:29:33 localhost dhclient: send_packet: Network is unreachable
Sep 12 09:29:33 localhost dhclient: send_packet: please consult README
file regarding broadcast address.
Sep 12 09:29:34 localhost ntpd[2845]: ntpd exiting on signal 15
Sep 12 09:29:34 localhost NetworkManager: <info> Error getting
killswitch power: org.freedesktop.Hal.Device.KillSwitch.NotSupported -
Access type not supported
Sep 12 09:29:53 localhost kernel: Stopping tasks ... done.
Sep 12 09:29:53 localhost kernel: Suspending console(s)
Sep 12 09:29:53 localhost NetworkManager: <info> Error getting
killswitch power: org.freedesktop.Hal.Device.KillSwitch.NotSupported -
Access type not supported
Sep 12 09:29:53 localhost kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
Sep 12 09:29:53 localhost kernel: sd 0:0:0:0: [sda] Stopping disk
Sep 12 09:29:53 localhost kernel: ACPI: PCI interrupt for device
0000:03:01.1 disabled
Sep 12 09:29:53 localhost kernel: ACPI: PCI interrupt for device
0000:00:1f.2 disabled
Sep 12 09:29:53 localhost kernel: ACPI: PCI interrupt for device
0000:00:1d.7 disabled
Sep 12 09:29:53 localhost kernel: ACPI: PCI interrupt for device
0000:00:1d.3 disabled
Sep 12 09:29:53 localhost kernel: ACPI: PCI interrupt for device
0000:00:1d.2 disabled
Sep 12 09:29:53 localhost kernel: ACPI: PCI interrupt for device
0000:00:1d.1 disabled
Sep 12 09:29:53 localhost kernel: ACPI: PCI interrupt for device
0000:00:1d.0 disabled
Sep 12 09:29:53 localhost kernel: ACPI: PCI interrupt for device
0000:00:1b.0 disabled
Sep 12 09:29:53 localhost kernel: Disabling non-boot CPUs ...
Sep 12 09:29:53 localhost kernel: Broke affinity for irq 14
Sep 12 09:29:53 localhost kernel: Broke affinity for irq 15
Sep 12 09:29:53 localhost kernel: Broke affinity for irq 17
Sep 12 09:29:53 localhost kernel: Broke affinity for irq 20
Sep 12 09:29:53 localhost kernel: Broke affinity for irq 21
Sep 12 09:29:53 localhost kernel: Broke affinity for irq 22
Sep 12 09:29:53 localhost kernel: CPU 1 is now offline
Sep 12 09:29:53 localhost kernel: SMP alternatives: switching to UP code
Sep 12 09:29:53 localhost kernel: CPU1 is down
Sep 12 09:29:53 localhost kernel: Enabling non-boot CPUs ...
Sep 12 09:29:53 localhost kernel: SMP alternatives: switching to SMP code
Sep 12 09:29:53 localhost kernel: Booting processor 1/2 APIC 0x1
Sep 12 09:29:53 localhost kernel: Initializing CPU#1
Sep 12 09:29:53 localhost kernel: Calibrating delay using timer specific
routine.. 4322.61 BogoMIPS (lpj=2161306)
Sep 12 09:29:53 localhost kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
Sep 12 09:29:53 localhost kernel: CPU: L2 cache: 4096K
Sep 12 09:29:53 localhost kernel: CPU 1/1 -> Node 0
Sep 12 09:29:53 localhost kernel: CPU: Physical Processor ID: 0
Sep 12 09:29:53 localhost kernel: CPU: Processor Core ID: 1
Sep 12 09:29:53 localhost kernel: Intel(R) Core(TM)2 CPU T7400
@ 2.16GHz stepping 06
Sep 12 09:29:53 localhost kernel: CPU1 is up
Sep 12 09:29:53 localhost kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] ->
GSI 21 (level, low) -> IRQ 21
Sep 12 09:29:53 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] ->
GSI 20 (level, low) -> IRQ 20
Sep 12 09:29:53 localhost kernel: usb usb1: root hub lost power or was reset
Sep 12 09:29:53 localhost kernel: PCI: Enabling device 0000:00:1d.1
(0000 -> 0001)
Sep 12 09:29:53 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] ->
GSI 21 (level, low) -> IRQ 21
Sep 12 09:29:53 localhost kernel: usb usb2: root hub lost power or was reset
Sep 12 09:29:53 localhost kernel: PCI: Enabling device 0000:00:1d.2
(0000 -> 0001)
Sep 12 09:29:53 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] ->
GSI 22 (level, low) -> IRQ 22
Sep 12 09:29:53 localhost kernel: usb usb3: root hub lost power or was reset
Sep 12 09:29:53 localhost kernel: PCI: Enabling device 0000:00:1d.3
(0000 -> 0001)
Sep 12 09:29:53 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.3[D] ->
GSI 23 (level, low) -> IRQ 23
Sep 12 09:29:53 localhost kernel: usb usb4: root hub lost power or was reset
Sep 12 09:29:53 localhost kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] ->
GSI 20 (level, low) -> IRQ 20
Sep 12 09:29:53 localhost kernel: ACPI: PCI Interrupt 0000:00:1f.2[B] ->
GSI 17 (level, low) -> IRQ 17
Sep 12 09:29:53 localhost hcid[2700]: HCI dev 0 down
Sep 12 09:29:53 localhost hcid[2700]: Stopping security manager 0
Sep 12 09:29:53 localhost hcid[2700]: Device hci0 has been disabled
Sep 12 09:29:53 localhost kernel: ACPI: PCI Interrupt 0000:01:00.0[A] ->
GSI 16 (level, low) -> IRQ 16
Sep 12 09:29:53 localhost kernel: ACPI: PCI Interrupt 0000:03:01.1[B] ->
GSI 18 (level, low) -> IRQ 18
Sep 12 09:29:53 localhost kernel: sd 0:0:0:0: [sda] Starting disk
Sep 12 09:29:53 localhost kernel: ata2.00: configured for UDMA/33
Sep 12 09:29:53 localhost kernel: ata1.00: configured for UDMA/100
Sep 12 09:29:53 localhost kernel: sd 0:0:0:0: [sda] 312581808 512-byte
hardware sectors (160042 MB)
Sep 12 09:29:53 localhost kernel: usb_endpoint usbdev5.2_ep00: PM:
resume from 0, parent 5-1 still 2
Sep 12 09:29:53 localhost kernel: hub 5-1:1.0: PM: resume from 2, parent
5-1 still 2
Sep 12 09:29:53 localhost kernel: usb_endpoint usbdev5.2_ep81: PM:
resume from 0, parent 5-1:1.0 still 2
Sep 12 09:29:53 localhost kernel: usb_device usbdev5.2: PM: resume from
0, parent 5-1 still 2
Sep 12 09:29:53 localhost kernel: usb 5-1.4: PM: resume from 2, parent
5-1 still 2
Sep 12 09:29:53 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Sep 12 09:29:53 localhost kernel: usb_endpoint usbdev5.4_ep00: PM:
resume from 0, parent 5-1.4 still 2
Sep 12 09:29:53 localhost kernel: hci_usb 5-1.4:1.0: PM: resume from 2,
parent 5-1.4 still 2
Sep 12 09:29:53 localhost kernel: usb_endpoint usbdev5.4_ep81: PM:
resume from 0, parent 5-1.4:1.0 still 2
Sep 12 09:29:53 localhost kernel: usb_endpoint usbdev5.4_ep82: PM:
resume from 0, parent 5-1.4:1.0 still 2
Sep 12 09:29:53 localhost kernel: usb_endpoint usbdev5.4_ep02: PM:
resume from 0, parent 5-1.4:1.0 still 2
Sep 12 09:29:53 localhost kernel: hci_usb 5-1.4:1.1: PM: resume from 2,
parent 5-1.4 still 2
Sep 12 09:29:53 localhost kernel: usb 5-1.4:1.2: PM: resume from 2,
parent 5-1.4 still 2
Sep 12 09:29:53 localhost kernel: sd 0:0:0:0: [sda] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Sep 12 09:29:53 localhost kernel: usb_endpoint usbdev5.4_ep84: PM:
resume from 0, parent 5-1.4:1.2 still 2
Sep 12 09:29:53 localhost kernel: usb_endpoint usbdev5.4_ep04: PM:
resume from 0, parent 5-1.4:1.2 still 2
Sep 12 09:29:53 localhost kernel: usb 5-1.4:1.3: PM: resume from 2,
parent 5-1.4 still 2
Sep 12 09:29:53 localhost kernel: usb_device usbdev5.4: PM: resume from
0, parent 5-1.4 still 2
Sep 12 09:29:53 localhost kernel: usb_endpoint usbdev3.2_ep00: PM:
resume from 0, parent 3-1 still 2
Sep 12 09:29:53 localhost kernel: usbhid 3-1:1.0: PM: resume from 2,
parent 3-1 still 2
Sep 12 09:29:53 localhost kernel: usb_endpoint usbdev3.2_ep81: PM:
resume from 0, parent 3-1:1.0 still 2
Sep 12 09:29:53 localhost kernel: usb_device usbdev3.2: PM: resume from
0, parent 3-1 still 2
Sep 12 09:29:53 localhost kernel: usb_endpoint usbdev5.4_ep83: PM:
resume from 0, parent 5-1.4:1.1 still 2
Sep 12 09:29:53 localhost kernel: usb_endpoint usbdev5.4_ep03: PM:
resume from 0, parent 5-1.4:1.1 still 2
Sep 12 09:29:53 localhost kernel: bluetooth hci0: PM: resume from 0,
parent 5-1.4:1.0 still 2
Sep 12 09:29:53 localhost kernel: Restarting tasks ... <6>usb 3-1: USB
disconnect, address 2
Sep 12 09:29:53 localhost kernel: done.
Sep 12 09:29:53 localhost kernel: usb 5-1: USB disconnect, address 2
Sep 12 09:29:53 localhost kernel: usb 5-1.4: USB disconnect, address 4
Sep 12 09:29:54 localhost hcid[2700]: HCI dev 0 unregistered
Sep 12 09:29:54 localhost hcid[2700]: Unregister path: /org/bluez/hci0
Sep 12 09:29:54 localhost hcid[2700]: Device hci0 has been removed
Sep 12 09:29:54 localhost kernel: usb 5-1: new high speed USB device
using ehci_hcd and address 5
Sep 12 09:29:54 localhost kernel: usb 5-1: configuration #1 chosen from
1 choice
Sep 12 09:29:54 localhost kernel: hub 5-1:1.0: USB hub found
Sep 12 09:29:55 localhost NetworkManager: <info> Waking up from sleep.
Sep 12 09:29:55 localhost NetworkManager: <info> Deactivating device
wlan0.
Sep 12 09:29:55 localhost kernel: hub 5-1:1.0: 4 ports detected
Sep 12 09:29:55 localhost kernel: Uhhuh. NMI received for unknown reason b0.
Sep 12 09:29:56 localhost kernel: You have some hardware problem, likely
on the PCI bus.
Sep 12 09:29:56 localhost kernel: Dazed and confused, but trying to continue
Sep 12 09:29:56 localhost NetworkManager: <WARN>
nm_device_802_11_wireless_set_essid(): error setting ESSID to '' for
device wlan0: Invalid argument
Sep 12 09:29:56 localhost kernel: usb 5-1.4: new full speed USB device
using ehci_hcd and address 7
Sep 12 09:29:57 localhost NetworkManager: <info> Deactivating device eth0.
Sep 12 09:29:57 localhost kernel: ADDRCONF(NETDEV_UP): wlan0: link is
not ready
Sep 12 09:29:57 localhost NetworkManager: <info> wlan0: Device is
fully-supported using driver 'ndiswrapper'.
Sep 12 09:29:58 localhost hcid[2700]: HCI dev 0 registered
Sep 12 09:29:58 localhost kernel: usb 5-1.4: configuration #1 chosen
from 1 choice
Sep 12 09:29:58 localhost NetworkManager: <info> nm_device_init():
waiting for device's worker thread to start
Sep 12 09:29:59 localhost hcid[2700]: HCI dev 0 up
Sep 12 09:29:59 localhost kernel: usb 3-1: new low speed USB device
using uhci_hcd and address 3
Sep 12 09:29:59 localhost NetworkManager: <info> nm_device_init():
device's worker thread started, continuing.
Sep 12 09:30:00 localhost hcid[2700]: Device hci0 has been added
Sep 12 09:30:00 localhost kernel: usb 3-1: configuration #1 chosen from
1 choice
Sep 12 09:30:00 localhost NetworkManager: <info> Now managing wireless
(802.11) device 'wlan0'.
Sep 12 09:30:00 localhost hcid[2700]: Starting security manager 0
Sep 12 09:30:00 localhost kernel: input: Logitech USB Optical Mouse as
/class/input/input7
Sep 12 09:30:00 localhost NetworkManager: <info> Deactivating device
wlan0.
Sep 12 09:30:00 localhost hcid[2700]: Device hci0 has been activated
Sep 12 09:30:00 localhost kernel: input: USB HID v1.10 Mouse [Logitech
USB Optical Mouse] on usb-0000:00:1d.2-1
Sep 12 09:30:00 localhost NetworkManager: <WARN>
nm_device_802_11_wireless_set_essid(): error setting ESSID to '' for
device wlan0: Invalid argument
Sep 12 09:30:00 localhost kernel: ADDRCONF(NETDEV_UP): eth0: link is not
ready
Sep 12 09:30:00 localhost NetworkManager: <info> eth0: Device is
fully-supported using driver 'b44'.
Sep 12 09:30:00 localhost NetworkManager: <info> nm_device_init():
waiting for device's worker thread to start
Sep 12 09:30:00 localhost NetworkManager: <info> nm_device_init():
device's worker thread started, continuing.
Sep 12 09:30:00 localhost NetworkManager: <info> Now managing wired
Ethernet (802.3) device 'eth0'.
Sep 12 09:30:00 localhost NetworkManager: <info> Deactivating device eth0.
Sep 12 09:30:00 localhost NetworkManager: <info> nm-netlink-monitor.c -
nm_netlink_monitor_event_handler (724) netlink reports device wlan0 link
now 0
Sep 12 09:30:00 localhost NetworkManager: <info> nm-netlink-monitor.c -
nm_netlink_monitor_event_handler (724) netlink reports device eth0 link
now 0
Sep 12 09:30:00 localhost NetworkManager: <info>
nm-device-802-3-ethernet.c - nm_device_802_3_ethernet_link_deactivated
(149) device eth0 scheduled link_deactivated_helper
Sep 12 09:30:00 localhost NetworkManager: <info>
nm-device-802-3-ethernet.c - link_deactivated_helper (129) device eth0
will set active link to FALSE
Sep 12 09:30:00 localhost NetworkManager: <info> Error getting
killswitch power: org.freedesktop.Hal.Device.KillSwitch.NotSupported -
Access type not supported
Sep 12 09:30:02 localhost kernel: b44: eth0: Link is up at 100 Mbps,
full duplex.
Sep 12 09:30:02 localhost kernel: b44: eth0: Flow control is off for TX
and off for RX.
Sep 12 09:30:02 localhost kernel: ADDRCONF(NETDEV_CHANGE): eth0: link
becomes ready
Sep 12 09:30:02 localhost NetworkManager: <info> nm-netlink-monitor.c -
nm_netlink_monitor_event_handler (724) netlink reports device eth0 link
now 1
Sep 12 09:30:02 localhost NetworkManager: <info>
nm-device-802-3-ethernet.c - link_activated_helper (102) device eth0
will set active link to TRUE
Sep 12 09:30:02 localhost NetworkManager: <info> nm-device.c -
nm_device_set_active_link (596) device eth0 link state set to 1
Sep 12 09:30:02 localhost NetworkManager: <info>
nm-device-802-3-ethernet.c - nm_device_802_3_ethernet_link_activated
(122) device eth0 scheduled link_activated_helper
Sep 12 09:30:02 localhost NetworkManager: <info> Will activate wired
connection 'eth0' because it now has a link.
Sep 12 09:30:02 localhost NetworkManager: <info> SWITCH: no current
connection, found better connection 'eth0'.
Sep 12 09:30:02 localhost NetworkManager: <info> Will activate
connection 'eth0'.
Sep 12 09:30:02 localhost NetworkManager: <info> Device eth0 activation
scheduled...
Sep 12 09:30:02 localhost NetworkManager: <info> Activation (eth0)
started...
Sep 12 09:30:02 localhost NetworkManager: <info> Activation (eth0)
Stage 1 of 5 (Device Prepare) scheduled...
Sep 12 09:30:02 localhost NetworkManager: <info> Activation (eth0)
Stage 1 of 5 (Device Prepare) started...
Sep 12 09:30:02 localhost NetworkManager: <info> Activation (eth0)
Stage 2 of 5 (Device Configure) scheduled...
Sep 12 09:30:02 localhost NetworkManager: <info> Activation (eth0)
Stage 1 of 5 (Device Prepare) complete.
Sep 12 09:30:02 localhost NetworkManager: <info> Activation (eth0)
Stage 2 of 5 (Device Configure) starting...
Sep 12 09:30:02 localhost NetworkManager: <info> Activation (eth0)
Stage 2 of 5 (Device Configure) successful.
Sep 12 09:30:02 localhost NetworkManager: <info> Activation (eth0)
Stage 3 of 5 (IP Configure Start) scheduled.
Sep 12 09:30:02 localhost NetworkManager: <info> Activation (eth0)
Stage 2 of 5 (Device Configure) complete.
Sep 12 09:30:02 localhost NetworkManager: <info> Activation (eth0)
Stage 3 of 5 (IP Configure Start) started...
Sep 12 09:30:03 localhost NetworkManager: <info> Activation (eth0)
Beginning DHCP transaction.
Sep 12 09:30:03 localhost NetworkManager: <info> Activation (eth0)
Stage 3 of 5 (IP Configure Start) complete.
Sep 12 09:30:03 localhost NetworkManager: <info> DHCP daemon state is
now 12 (successfully started) for interface eth0
Sep 12 09:30:03 localhost NetworkManager: <info> DHCP daemon state is
now 1 (starting) for interface eth0
Sep 12 09:30:03 localhost dhclient: DHCPDISCOVER on eth0 to
255.255.255.255 port 67 interval 6
Sep 12 09:30:03 localhost avahi-daemon[3077]: Joining mDNS multicast
group on interface eth0.IPv6 with address fe80::218:8bff:fea2:425f.
Sep 12 09:30:03 localhost avahi-daemon[3077]: New relevant interface
eth0.IPv6 for mDNS.
Sep 12 09:30:03 localhost avahi-daemon[3077]: Registering new address
record for fe80::218:8bff:fea2:425f on eth0.*.
Sep 12 09:30:05 localhost NetworkManager: <info> Old device 'eth0'
activating, won't change.
Sep 12 09:30:06 localhost NetworkManager: <info> Error getting
killswitch power: org.freedesktop.Hal.Device.KillSwitch.NotSupported -
Access type not supported
Sep 12 09:30:09 localhost dhclient: DHCPDISCOVER on eth0 to
255.255.255.255 port 67 interval 14
Sep 12 09:30:09 localhost dhclient: DHCPOFFER from 159.218.3.254
Sep 12 09:30:09 localhost dhclient: DHCPREQUEST on eth0 to
255.255.255.255 port 67
Sep 12 09:30:09 localhost dhclient: DHCPACK from 159.218.3.254
Sep 12 09:30:09 localhost dhclient: bound to 159.218.3.30 -- renewal in
723754 seconds.
Sep 12 09:30:09 localhost NetworkManager: <info> DHCP daemon state is
now 2 (bound) for interface eth0
Sep 12 09:30:09 localhost NetworkManager: <info> Activation (eth0)
Stage 4 of 5 (IP Configure Get) scheduled...
Sep 12 09:30:09 localhost NetworkManager: <info> Activation (eth0)
Stage 4 of 5 (IP Configure Get) started...
Sep 12 09:30:09 localhost dhcdbd: message_handler: message handler not
found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.host_name
Sep 12 09:30:09 localhost dhcdbd: message_handler: message handler not
found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_domain
Sep 12 09:30:09 localhost dhcdbd: message_handler: message handler not
found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_servers
Sep 12 09:30:09 localhost NetworkManager: <info> Retrieved the
following IP4 configuration from the DHCP daemon:
Sep 12 09:30:09 localhost NetworkManager: <info> address 159.218.3.30
Sep 12 09:30:09 localhost NetworkManager: <info> netmask 255.255.255.0
Sep 12 09:30:09 localhost NetworkManager: <info> broadcast 159.218.3.255
Sep 12 09:30:09 localhost NetworkManager: <info> gateway 159.218.3.254
Sep 12 09:30:09 localhost NetworkManager: <info> nameserver
159.218.1.100
Sep 12 09:30:09 localhost NetworkManager: <info> nameserver
159.218.1.101
Sep 12 09:30:09 localhost NetworkManager: <info> domain name 'vinu.edu'
Sep 12 09:30:09 localhost NetworkManager: <info> Activation (eth0)
Stage 5 of 5 (IP Configure Commit) scheduled...
Sep 12 09:30:09 localhost NetworkManager: <info> Activation (eth0)
Stage 4 of 5 (IP Configure Get) complete.
Sep 12 09:30:09 localhost NetworkManager: <info> Activation (eth0)
Stage 5 of 5 (IP Configure Commit) started...
Sep 12 09:30:09 localhost avahi-daemon[3077]: Withdrawing address record
for fe80::218:8bff:fea2:425f on eth0.
Sep 12 09:30:09 localhost avahi-daemon[3077]: Leaving mDNS multicast
group on interface eth0.IPv6 with address fe80::218:8bff:fea2:425f.
Sep 12 09:30:09 localhost avahi-daemon[3077]: Interface eth0.IPv6 no
longer relevant for mDNS.
Sep 12 09:30:09 localhost avahi-daemon[3077]: Joining mDNS multicast
group on interface eth0.IPv4 with address 159.218.3.30.
Sep 12 09:30:09 localhost avahi-daemon[3077]: New relevant interface
eth0.IPv4 for mDNS.
Sep 12 09:30:09 localhost avahi-daemon[3077]: Registering new address
record for 159.218.3.30 on eth0.IPv4.
Sep 12 09:30:10 localhost NetworkManager: <info> Activation (eth0)
Finish handler scheduled.
Sep 12 09:30:10 localhost NetworkManager: <info> Activation (eth0)
Stage 5 of 5 (IP Configure Commit) complete.
Sep 12 09:30:10 localhost NetworkManager: <info> Activation (eth0)
successful, device activated.
Sep 12 09:30:11 localhost avahi-daemon[3077]: Joining mDNS multicast
group on interface eth0.IPv6 with address fe80::218:8bff:fea2:425f.
Sep 12 09:30:11 localhost avahi-daemon[3077]: New relevant interface
eth0.IPv6 for mDNS.
Sep 12 09:30:11 localhost avahi-daemon[3077]: Registering new address
record for fe80::218:8bff:fea2:425f on eth0.*.
Sep 12 09:30:12 localhost NetworkManager: <info> Error getting
killswitch power: org.freedesktop.Hal.Device.KillSwitch.NotSupported -
Access type not supported
--
Justin Stanczak
Stanczak Group
812-735-3600
"All that is necessary for the triumph of evil is that good men do nothing."
Edmund Burke
