Les Mikesell wrote:
Karl Larsen wrote:
Les Mikesell wrote:
Karl Larsen wrote:
I found this on Google but it doesn't help me much:
echo "Loading scsi_mod module"
insmod /lib/scsi_mod.o echo "Loading sd_mod module"
insmod /lib/sd_mod.o echo "Loading cpqarray module"
insmod /lib/cpqarray.o echo "Loading jbd module"
insmod /lib/jbd.o echo "Loading ext3 module"
insmod /lib/ext3.o mount -t proc /proc /proc
echo Mounting /proc filesystem
echo Creating root device
mkrootdev /dev/root
This seems to be where /dev/root comes from. And my kernel can't
find it for some reason.
echo 0x0100 > /proc/sys/kernel/real-root-dev
umount /proc
echo Mounting root filesystem
mount --ro -t ext3 /dev/root /sysroot
pivot_root /sysroot /sysroot/initrd
There is a point in the boot sequence where the bios-loaded kernel
trades the initrd RAM disk image (also bios loaded) for the real
root partion mount point. Several things can go wrong here. Grub
may have told the kernel to look in the wrong place for the root
file system, the file system might be unreadable, or you may have
moved the system onto a machine with a different type of disk
controller that needs a different driver module included on the
initrd. The main reason you need the initrd is to load drivers for
the root filesystem if they aren't compiled into the kernel but it
will only include ones for the the machine where the system was
originally installed. If you can access the disk, somewhere in the
boot messages you should see it detecting the device and
partitions. If you don't see that, the kernel can't see the disk
and you'll have to rebuild the initrd with the right module.
Initrd has to be the problem Les. I have had the old hard drive on
this new box and I was surprised that FC6 would boot up but F7 did
what it has done all along. Now I did load a new F7 on the old hard
drive and it booted up fine. So this info backs up my belief that
initrd is the problem.
I will now try and find out HowTo rebuild initrd from a Rescue cd :-)
If your rescue boot mounts the system drives and suggests a chroot
command, do that, then add the right alias command to
/etc/modprobe.conf (will depend on hardware) and then run mkinitrd.
What is an alias command? How do I find it with a rescue cd?
--
Karl F. Larsen, AKA K5DI
Linux User
#450462 http://counter.li.org.
