On Wed, 2007-08-22 at 12:58 +0100, Alan Cox wrote:
> > So in my case, is there a workaround to get it going?
> >
> > 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller not detected on boot
> > in Thinkpad T61
>
> The ICH8M/M-E isn't known by the FC7 install kernel (its a tiny bit too
> new)
>
> Booting with ata_generic.all_generic_ide=1 as a boot option if the
> controller is in non-AHCI mode may help, otherwise you need a newer
> install image from someone.
I got the install done with the controller in compatibility mode (no
boot options needed). But I can't boot the latest production kernel in
AHCI mode either--stops with a kernel panic. Is kernel-2.6.22.1-41.fc7
still not new enough?
--
Matthew Saltzman
Clemson University Math Sciences
mjs AT clemson DOT edu
http://www.math.clemson.edu/~mjs
