On Tuesday 14 August 2007 19:40, Mikkel L. Ellertson wrote:
Nigel Henry wrote:
> Hi Yunus. Your modprobe.conf seems ok, but I believe you need to add a
> model option to one of the lines.
>
> I spent a bit of time on Google today, and a link on a post to the alsa
> developers list moved me to download the latest snapshot of the alsa
> driver. The post also suggested looking in ALSA-configuration.txt,
> which
> I found in the unpacked tarball.
>
> For the snd-hda-intel module, and the following chipsets refer to Acer
> Travelmate laptops. ALC260, and ALC883/888.
>
> You'll probably find that alsamixer shows the chipset as one of these.
>
> The suggestion for both of these is to set an option of "model=acer"
> (without the double quotes).
>
> It's worth a go, so open a konsole (CLI), su to root, and in a text
> editor, Gedit, Kwrite, etc, go to /etc/modprobe.conf, and change the
> last
> line that you show above, so that it says.
>
> options snd-hda-intel index=0 model=acer
>
> Save, then close the text editor. Still as root, run depmod -a, then
> reboot while praying.
>
> Whether this will work or not I don't know, but you only have to read
> through the ALSA-configuration.txt doc, to see how many variations
> there
> are (up to now), for chipsets that use snd-hda-intel. Links below.
You should not need to reboot. After running depmod, you should be
able to run "modprobe -r snd-card-0" and then "modprobe snd-card-0"
to reload the module with the new options. I did a fair amount of
that when trying to find the model that worked right with my Toshiba.
Mikkel
Thanks for the info Mikkel, and referenced in my notebook.
Whether model=acer works for Yanus may be a bit hit and miss, but worth a
try.
Nigel.
Hi Nigel & Mikkel,
Thanks for your great help. I will give it a try.
You may assume me a linux novice with "Introduction to Linux" by Machtelt
Garreles (I downloaded from Linux Documention Project)
yunus
