Hi,
I have problem on a home network. there is a server and client pc. Both ping and ssh to each other are ok.
i set up /etc/exports at server as
/data client(rw,root_squash,sync)
when I try to mount this on client, i got error as
mount: RPC: Program not registered
or
can't contact portmapper: RPC: Remote system error - No route to host
at client
/usr/sbin/rpcinfo -p server
rpcinfo: can't contact portmapper: RPC: Remote system error - No route to host
at server:
/usr/sbin/rpcinfo -p
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 858 status
100024 1 tcp 861 status
100021 1 udp 32768 nlockmgr
100021 3 udp 32768 nlockmgr
100021 4 udp 32768 nlockmgr
100021 1 tcp 43087 nlockmgr
100021 3 tcp 43087 nlockmgr
100021 4 tcp 43087 nlockmgr
300019 1 tcp 734 amd
300019 1 udp 735 amd
100011 1 udp 620 rquotad
100011 2 udp 620 rquotad
100011 1 tcp 623 rquotad
100011 2 tcp 623 rquotad
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100005 1 udp 633 mountd
100005 1 tcp 636 mountd
100005 2 udp 633 mountd
100005 2 tcp 636 mountd
100005 3 udp 633 mountd
100005 3 tcp 636 mountd
I looked at nfs howto a
thttp://nfs.sourceforge.net/nfs-howto/ar01s07.html#unable_to_mount_fs
it says:
If you get the error Remote system error - No route to host,
but you can ping the server correctly, then you are the victim of an
overzealous firewall. Check any firewalls that may be set up, either on
the server or on any routers in between the client and the server. Look
at the man pages for ipchains, netfilter, and ipfwadm, as well as the
IPChains-HOWTO and the Firewall-HOWTO
for help.
where to check the firewall settings?
thanks
Yuan
