On Thu, 2007-08-02 at 13:57 -0700, Kam Leo wrote: > On 8/2/07, Chris Mohler <cr33dog@xxxxxxxxx> wrote: > > On 8/2/07, Gilbert Sebenste <sebenste@xxxxxxxxxxxxxxxxxxxxxx> wrote: > > [...] > > > So I am egtting a lot of error messages. I hae reset the printer...I don't > > > know what else to do. > > > > Try this: > > cat /usr/share/cups/data/testprint.ps > /dev/lp0 (or /dev/parport0? > > I'm away from F7 right now) > > > > If you get a test page, then you know at least the printer is > > functioning and properly connected. Next, I'd probably stop the > > "hplip" service, restart CUPS and see if the parallel port is then > > offered. Or use the CUPS web interface (http://localhost:631). > > > > HTH, > > Chris > > The 4000 series are "Laserjet" printers. HPLIP is HP's driver for > "INKJET" printers. > Unless there is a name mixup the above characterization of HLIP seems wrong. -- ======================================================================= "Open the pod bay doors, HAL." -- Dave Bowman, 2001 ======================================================================= Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam@xxxxxxxxxxxxx
