On Tue, 2007-06-12 at 00:49 -0700, E. Robert Tisdale wrote: > When booting, the system tries to set /dev/ttyS3, /dev/ttyS0, > /dev/ttyS1 and /dev/ttyS2 but fails. None of these messages > show up in /var/log/messages or /var/log/dmesg. setserial > does not recognize any of these as serial devices. I don't > think I have access to *any* of my serial ports. How is your BIOS set up? In the past I had problems when the BIOS was set to to use "AUTO" for the serial ports, but things were fine when they had preset IRQ and DMA values. -- (This box runs FC7, my others still run FC4, FC5, & FC6 in case that's important to the thread.) Don't send private replies to my address, the mailbox is ignored. I read messages from the public lists.
