On Fri, 1 Jun 2007, Mark Hutchinson wrote: > Any idea what causes this? Hardware issues? > Where does the 10195 number come from? > > I just like to understand what the issue cause is and what the command > actually does. 100% + 1.95% = 101.95% > On 6/1/07, Dr. Michael J. Chudobiak <mjc@xxxxxxxxxxxxxxx> wrote: > > > > Mark Hutchinson wrote: > > > I have a server that has a time drift of around a minute every hour. > > > Overnight, that is pretty extreme and as this is a PVR, it causes > > problems. > > > I have NTP enabled but am still getting this drift and NTP is not > > > correcting or putting much in the logs ( no exit messages ) > > > > I had the same problem on a brand-new DC7700. ntp can only correct > > within 500 ppm (0.05%). For some reason, the DC700 clock was 1.95% too > > fast! -- Mike hennebry@xxxxxxxxxxxxxxxxxxxxx "Horse guts never lie." -- Cherek Bear-Shoulders
