On Fri, 25 May 2007 10:57:58 +0300 "Dragos Ungureanu" <dragos@xxxxxxxxxxxxxxxxxx> wrote: > Hello all, > > I encountered the following message on my FC5: > > "Informational - artsmessage > Sound server informational messsage: > Error while initializing the sound driver > device: default can't be opened for capture (No such file or > directory) The sound server will continue using the null output > device" > > I didn't change anything, the message just showed up in KDE when I > started the computer. > Below are the outputs of lsmod and dmesg. > Please advice how can I get rid of this and restore the sound. Thank > you in advance > > Regards, > Dragos > > Module Size Used by > i915 22465 1 > drm 74069 2 i915 > autofs4 20421 1 > hidp 15681 2 > rfcomm 35673 0 > l2cap 22849 10 hidp,rfcomm > bluetooth 49317 5 hidp,rfcomm,l2cap > sunrpc 148349 1 > nf_conntrack_netbios_ns 3265 0 > nf_conntrack_ipv4 17613 1 > xt_state 2753 1 > nf_conntrack 57745 3 > nf_conntrack_netbios_ns,nf_conntrack_ipv4,xt_state > nfnetlink 7001 2 nf_conntrack_ipv4,nf_conntrack > ipt_REJECT 4801 2 > xt_tcpudp 3393 8 > iptable_filter 3265 1 > ip_tables 11913 1 iptable_filter > x_tables 14661 4 > xt_state,ipt_REJECT,xt_tcpudp,ip_tables video 16069 > 0 sbs 15232 0 > i2c_ec 5185 1 sbs > dock 10265 0 > container 4673 0 > button 8017 0 > battery 10053 0 > asus_acpi 16605 0 > backlight 6337 1 asus_acpi > ac 5316 0 > ipv6 249473 18 > lp 12425 0 > parport_pc 26341 1 > parport 34697 2 lp,parport_pc > snd_intel8x0 31709 1 > snd_ac97_codec 89573 1 snd_intel8x0 > ac97_bus 2625 1 snd_ac97_codec > snd_seq_dummy 4037 0 > sg 33373 0 > snd_seq_oss 29377 0 > serio_raw 7109 0 > ide_cd 36833 0 > i2c_i801 8013 0 > e100 33737 0 > snd_seq_midi_event 7361 1 snd_seq_oss > i2c_core 21057 2 i2c_ec,i2c_i801 > mii 5569 1 e100 > snd_seq 45873 5 > snd_seq_dummy,snd_seq_oss,snd_seq_midi_event ehci_hcd > 30549 0 snd_seq_device 8013 3 > snd_seq_dummy,snd_seq_oss,snd_seq uhci_hcd 22865 0 > snd_pcm_oss 39905 0 > snd_mixer_oss 15681 1 snd_pcm_oss > snd_pcm 71365 3 > snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_timer 21317 > 2 snd_seq,snd_pcm snd 49733 11 > snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer > soundcore 7841 1 snd > snd_page_alloc 10057 2 snd_intel8x0,snd_pcm > cdrom 33505 1 ide_cd > iTCO_wdt 11269 0 > iTCO_vendor_support 4037 1 iTCO_wdt > pcspkr 3393 0 > dm_snapshot 16881 0 > dm_zero 2241 0 > dm_mirror 21205 0 > dm_mod 53773 8 dm_snapshot,dm_zero,dm_mirror > ext3 120009 2 > jbd 56041 1 ext3 > ata_piix 15173 2 > libata 100825 1 ata_piix > sd_mod 20161 3 > scsi_mod 134253 3 sg,libata,sd_mod > > > Linux version 2.6.20-1.2316.fc5 > (brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1 > 20070105 (Red Hat 4.1.1-51)) #1 Fri Apr 27 19:49:38 EDT 2007 > BIOS-provided physical RAM map: > sanitize start > sanitize end > copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: > 000000000009f800 type: 1 > copy_e820_map() type is E820_RAM > copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: > 00000000000a0000 type: 2 > copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: > 0000000000100000 type: 2 > copy_e820_map() start: 0000000000100000 size: 000000001eef0000 end: > 000000001eff0000 type: 1 > copy_e820_map() type is E820_RAM > copy_e820_map() start: 000000001eff0000 size: 0000000000003000 end: > 000000001eff3000 type: 4 > copy_e820_map() start: 000000001eff3000 size: 000000000000d000 end: > 000000001f000000 type: 3 > copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: > 0000000100000000 type: 2 > BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000001eff0000 (usable) > BIOS-e820: 000000001eff0000 - 000000001eff3000 (ACPI NVS) > BIOS-e820: 000000001eff3000 - 000000001f000000 (ACPI data) > BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) > 0MB HIGHMEM available. > 495MB LOWMEM available. > found SMP MP-table at 000f5060 > Using x86 segment limits to approximate NX protection > Entering add_active_range(0, 0, 126960) 0 entries of 256 used > Zone PFN ranges: > DMA 0 -> 4096 > Normal 4096 -> 126960 > HighMem 126960 -> 126960 > early_node_map[1] active PFN ranges > 0: 0 -> 126960 > On node 0 totalpages: 126960 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 4064 pages, LIFO batch:0 > Normal zone: 959 pages used for memmap > Normal zone: 121905 pages, LIFO batch:31 > HighMem zone: 0 pages used for memmap > DMI 2.3 present. > Using APIC driver default > ACPI: RSDP (v000 GBT ) @ 0x000f69e0 > ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ > 0x1eff3000 ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD > 0x01010101) @ 0x1eff3040 ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 > AWRD 0x01010101) @ 0x1eff6ec0 ACPI: DSDT (v001 GBT AWRDACPI > 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: > 0x1008 ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > Processor #0 15:4 APIC version 20 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) > ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > Using ACPI (MADT) for SMP configuration information > Allocating PCI resources starting at 20000000 (gap: 1f000000:dfc00000) > Detected 2813.898 MHz processor. > Built 1 zonelists. Total pages: 125969 > Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet > ramdisk_size=32000 > mapped APIC to ffffd000 (fee00000) > mapped IOAPIC to ffffc000 (fec00000) > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > CPU 0 irqstacks, hard=c0720000 soft=c071f000 > PID hash table entries: 2048 (order: 11, 8192 bytes) > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Memory: 497412k/507840k available (2091k kernel code, 9852k reserved, > 846k data, 232k init, 0k highmem) > virtual kernel memory layout: > fixmap : 0xfff9b000 - 0xfffff000 ( 400 kB) > pkmap : 0xff800000 - 0xffc00000 (4096 kB) > vmalloc : 0xdf800000 - 0xff7fe000 ( 511 MB) > lowmem : 0xc0000000 - 0xdeff0000 ( 495 MB) > .init : 0xc06e0000 - 0xc071a000 ( 232 kB) > .data : 0xc060ac8d - 0xc06de614 ( 846 kB) > .text : 0xc0400000 - 0xc060ac8d (2091 kB) > Checking if this processor honours the WP bit even in supervisor > mode... Ok. Calibrating delay using timer specific routine.. 5629.24 > BogoMIPS (lpj=2814624) > Security Framework v1.0.0 initialized > SELinux: Initializing. > SELinux: Starting in permissive mode > selinux_register_security: Registering secondary module capability > Capability LSM initialized as secondary > Mount-cache hash table entries: 512 > CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 > 0000441d 00000000 00000000 > monitor/mwait feature present. > using mwait in idle threads. > CPU: Trace cache: 12K uops, L1 D cache: 16K > CPU: L2 cache: 256K > CPU: After all inits, caps: bfebf3ff 00000000 00000000 00003180 > 0000441d 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU0: Intel P4/Xeon Extended MCE MSRs (12) available > CPU: Intel(R) Celeron(R) CPU 2.80GHz stepping 01 > Checking 'hlt' instruction... OK. > ACPI: Core revision 20060707 > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: PCI BIOS revision 2.10 entry at 0xfb090, last bus=1 > PCI: Using configuration type 1 > Setting up standard PCI resources > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > Boot video device is 0000:00:02.0 > PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO > PCI quirk: region 1080-10bf claimed by ICH4 GPIO > 0000:00:1f.2: trying to change BAR0 from 0000 to 01F0 > 0000:00:1f.2: trying to change BAR1 from 0000 to 03F4 > 0000:00:1f.2: trying to change BAR2 from 0000 to 0170 > 0000:00:1f.2: trying to change BAR3 from 0000 to 0374 > PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling > PCI: Transparent bridge - 0000:00:1e.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, > disabled. > ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 *6 7 9 10 11 12 14 15) > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > pnp: PnP ACPI: found 12 devices > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post > a report > NetLabel: Initializing > NetLabel: domain hash size = 128 > NetLabel: protocols = UNLABELED CIPSOv4 > NetLabel: unlabeled traffic allowed by default > PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 > PCI: Bridge: 0000:00:1e.0 > IO window: a000-afff > MEM window: f8000000-f80fffff > PREFETCH window: disabled. > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > NET: Registered protocol family 2 > IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > TCP established hash table entries: 16384 (order: 6, 262144 bytes) > TCP bind hash table entries: 8192 (order: 5, 163840 bytes) > TCP: Hash tables configured (established 16384 bind 8192) > TCP reno registered > checking if image is initramfs... it is > Freeing initrd memory: 1823k freed > apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) > apm: overridden by ACPI. > audit: initializing netlink socket (disabled) > audit(1180077432.618:1): initialized > Total HugeTLB memory allocated, 0 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > SELinux: Registering netfilter hooks > ksign: Installing public key data > Loading keyring > - Added public key 25F61B5382879C57 > - User ID: Red Hat, Inc. (Kernel Module GPG key) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > ACPI: Fan [FAN] (on) > ACPI: Thermal Zone [THRM] (22 C) > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > Real Time Clock Driver v1.12ac > Non-volatile memory driver v1.2 > Linux agpgart interface v0.101 (c) Dave Jones > agpgart: Detected an Intel 865 Chipset. > agpgart: Detected 16252K stolen memory. > agpgart: AGP aperture is 128M @ 0xf0000000 > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing > enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > RAMDISK driver initialized: 16 RAM disks of 32000K size 4096 blocksize > input: Macintosh mouse button emulation as /class/input/input0 > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=xx Probing IDE interface ide0... > hdb: _NEC CD-ROM CD-3002A, ATAPI CD/DVD-ROM drive > ide1: I/O resource 0x170-0x177 not free. > ide1: ports already in use, skipping probe > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide-floppy driver 0.99.newide > usbcore: registered new interface driver libusual > usbcore: registered new interface driver hiddev > usbcore: registered new interface driver usbhid > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > input: AT Translated Set 2 keyboard as /class/input/input1 > TCP bic registered > Initializing XFRM netlink socket > NET: Registered protocol family 1 > NET: Registered protocol family 17 > Using IPI Shortcut mode > ACPI: (supports S0 S1 S4 S5) > Freeing unused kernel memory: 232k freed > Write protecting the kernel read-only data: 585k > Time: tsc clocksource has been installed. > SCSI subsystem initialized > libata version 2.00 loaded. > ata_piix 0000:00:1f.2: version 2.00ac7 > ata_piix 0000:00:1f.2: MAP [ IDE IDE P0 P1 ] > ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 16 > ata: 0x1F0 IDE port busy > ata: conflict with ide0 > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > ata1: DUMMY > ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15 > scsi0 : ata_piix > scsi1 : ata_piix > ata2.00: ATA-6, max UDMA/133, 312579695 sectors: LBA48 NCQ (depth > 0/32) ata2.00: ata2: dev 0 multi count 16 > ata2.00: configured for UDMA/133 > scsi 1:0:0:0: Direct-Access ATA ST3160827AS 3.42 PQ: 0 > ANSI: 5 SCSI device sda: 312579695 512-byte hdwr sectors (160041 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > SCSI device sda: 312579695 512-byte hdwr sectors (160041 MB) > sda: Write Protect is off > sda: Mode Sense: 00 3a 00 00 > SCSI device sda: write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sda: sda1 sda2 > sd 1:0:0:0: Attached scsi disk sda > device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: > dm-devel@xxxxxxxxxx > input: ImPS/2 Generic Wheel Mouse as /class/input/input2 > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > SELinux: Disabled at runtime. > SELinux: Unregistering netfilter hooks > audit(1180077435.708:2): selinux=0 auid=4294967295 > input: PC Speaker as /class/input/input3 > iTCO_vendor_support: vendor-support=0 > iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006) > iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x1060) > iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > intel_rng: FWH not detected > USB Universal Host Controller Interface driver v3.0 > ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 > uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000b000 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000b400 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI > e100: Copyright(c) 1999-2006 Intel Corporation > ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000b800 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > hdb: ATAPI 52X CD-ROM drive, 128kB Cache > Uniform CD-ROM driver Revision: 3.20 > ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 17 > PCI: Setting latency timer of device 0000:00:1d.3 to 64 > uhci_hcd 0000:00:1d.3: UHCI Host Controller > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000bc00 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > sd 1:0:0:0: Attached scsi generic sg0 type 0 > ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19 > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 > PCI: cache line size of 128 is not supported by device 0000:00:1d.7 > ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf8180000 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 8 ports detected > ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20 > PCI: Setting latency timer of device 0000:00:1f.5 to 64 > intel8x0_measure_ac97_clock: measured 50710 usecs > intel8x0: clocking to 48000 > ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 21 > e100: eth0: e100_probe: addr 0xf8000000, irq 21, MAC addr > 00:0F:EA:F0:FF:56 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 > (level, low) -> IRQ 20 floppy0: no floppy controllers found > parport: PnPBIOS parport detected. > parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] > lp0: using parport0 (interrupt-driven). > lp0: console ready > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > Mobile IPv6 > input: Power Button (FF) as /class/input/input4 > ACPI: Power Button (FF) [PWRF] > input: Power Button (CM) as /class/input/input5 > ACPI: Power Button (CM) [PWRB] > No dock devices found. > ibm_acpi: ec object not found > md: Autodetecting RAID arrays. > md: autorun ... > md: ... autorun DONE. > EXT3 FS on dm-0, internal journal > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda1, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > Adding 1015800k swap on /dev/VolGroup00/LogVol01. Priority:-1 > extents:1 across:1015800k > ip_tables: (C) 2000-2006 Netfilter Core Team > Netfilter messages via NETLINK v0.30. > nf_conntrack version 0.5.0 (3967 buckets, 31736 max) > e100: eth0: e100_watchdog: link up, 10Mbps, half-duplex > Bluetooth: Core ver 2.11 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > Bluetooth: L2CAP ver 2.8 > Bluetooth: L2CAP socket layer initialized > Bluetooth: RFCOMM socket layer initialized > Bluetooth: RFCOMM TTY layer initialized > Bluetooth: RFCOMM ver 1.8 > Bluetooth: HIDP (Human Interface Emulation) ver 1.1 > eth0: no IPv6 routers present > [drm] Initialized drm 1.1.0 20060810 > ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 > [drm] Initialized i915 1.6.0 20060119 on minor 0 Did anything change around the time the problem occurred? Software update, hardware update, software install, configuration file, etc. This isn't an attack or questioning your integrity. It is just that computers are very literal. If you didn't change anything, the computer will behave identically in every case. So either the computer itself changed (hardware malfunction) or some piece of software changed (running something different than before). Because of the complex interactions that take place on modern a OS, seemingly unrelated things can cause problems.
