Today Bob Goodwin - W2BOD did spake thusly:
Paulo Cavalcanti wrote:
> Does anyone out there have the Logitech STX Communicate webcam working
> with FC6? And, if so, what was required besides plugging it in?
No. But you should need gspcav1 kernel module:
http://atrpms.net/dist/fc6/gspca/
Install and load the module (or reboot).
--
Paulo Roma Cavalcanti
LCG - UFRJ
How does one deal with this?
camE
can't load font arial/8
can't load font arial/8
can't load offline image /home/gilbertt/.block.jpg, ignoring
^^^ this is irrelevant, simply config issues with camE
open /dev/video0: No such file or directory
^^^ this would imply that either your camera isn't supported by the kernel
module or the module isn't loaded...or for some bizarre reason it's on
video1 or something.
Can you verify that the kernel module is loaded?
The camera is there -
lsusb
Bus 002 Device 004: ID 046d:0870 Logitech, Inc. QuickCam Express
Bus 002 Device 001: ID 0000:0000 Bus 002 Device 003: ID 046d:c408 Logitech,
Inc. Marble Mouse (4-button)
Bus 003 Device 001: ID 0000:0000 Bus 005 Device 001: ID 0000:0000 Bus 004
Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000
Obviously there is something I have not done?
Bob Goodwin
--
Scott van Looy - email:me@xxxxxxxxxxxxxx | web:www.ethosuk.org.uk
site:www.freakcity.net - the in place for outcasts since 2003
PGP Fingerprint: 7180 5543 C6C4 747B 7E74 802C 7CF9 E526 44D9 D4A7
-------------------------------------------
|/// /// /// /// WIDE LOAD /// /// /// ///|
-------------------------------------------
Decreasing electron flux
