On Mon, 7 May 2007 21:18:49 -0400 "Nat Gross" <nat101l@xxxxxxxxx> wrote: > On 5/7/07, Rick Stevens <rstevens@xxxxxxxxxxxx> wrote: > > On Mon, 2007-05-07 at 20:40 -0400, Nat Gross wrote: > > > And....I just realized that the FC6 DVD is not bootable???? > > > > No, that's not true. The FC6 DVD is bootable. The only gotcha is > > that on 32-bit machines, both the CD and DVD will install the 586 > > kernel on 686 machines. Fix by "yum install kernel-i686" > > > > > On my other machines I used yum to go from FC 5 to FC 6, and when > > > I went from FC 4 To FC 5 I used the image on disk. This is the > > > first time I actually burned the image to DVD. But... NO BOOT? Do > > > I need the first FC 6 CD to boot? > > > > If you're sure you're using a DVD drive and not a CD drive, then > > your burn was bad and you should retry it. > It's a dvd drive, I guess I need to reburn. > thanks > nat > Burn it at a very low speed. I had the same problem when I allowed it to burn at whatever speed it wanted. I used 4x on a 16x drive and it booted fine after that.
