On Fri, 2007-03-09 at 21:01 -0500, Ric Moore wrote:
> On Fri, 2007-03-09 at 19:37 +0530, Rahul Sundaram wrote:
> > Ric Moore wrote:
> > > On Fri, 2007-03-09 at 19:22 +0530, Rahul Sundaram wrote:
> > >> Ric Moore wrote:
> > >>
> > >>> I installed the fedora-ds-1.0.4-1.FC6.i386.opt.rpm
> > >>> Do I now yum install fedora-ds-base after? There are no init scripts in
> > >>> the original rpm, that are installed to /etc/rc.d/init.d/
> > >>> I'd like to get this right the first time.
> > >> If you already installed fedora-ds package, don't bother with
> > >> fedora-ds-base which is a subset. The advantage to the package in the
> > >> repository is that it better follows Fedora packaging guidelines.
> > >
> > > And the init scripts? I'd rather the entire affair be yumable and
> > > following Fedora packaging quide-lines. What would you do? I have done
> > > anything at this point other than run the config script, I have no
> > > problem doing this right and running through the config process again.
> >
> > Check fedora directory server announce list and fedora directory server
> > list for details. You can continue further discussions on the latter.
>
> That wasn't particularly the answer I needed. :( Ric
----
2 scripts follow...
# cat /etc/init.d/fds
#!/bin/sh
# Startup script for Fedora Directory Server
#
# chkconfig: 345 86 14
# description: Run each LDAP slapd server in the Fedora Directory Server
# Source function library.
. /etc/rc.d/init.d/functions
myName=`basename $0`
fdsRoot="/opt/fedora-ds"
# Get a list of all slapd server ID's
# We will iterate over all server ID's when executing a command
if [ -d ${fdsRoot}/slapd-srv1 ]; then
serverIDS=`ls -d $fdsRoot/slapd-srv1 | sed -r 's!.*/slapd-([^/]+)/?!
\1!'`
else
servierIDS=""
fi
start()
{
RETVAL=0
failed=""
listSeparator=""
failSeparator=""
echo -n "Starting slapd trying: "
for serverID in $serverIDS; do
slapd="slapd-${serverID}"
echo -n "${listSeparator}${serverID}"
${fdsRoot}/${slapd}/start-slapd > /dev/null 2>&1
slapdStatus=$?
# 0: Server started successfully
# 1: Server could not be started
# 2: Server already running
if [ $slapdStatus = 0 ]; then
touch /var/lock/subsys/${slapd}
else
failed="${failed}${failSeparator}${serverID}(${slapdStatus})"
failSeparator=","
RETVAL=$slapdStatus
fi
listSeparator=","
done
if [ ! -z $failed ]; then
echo -n " (FAIL ${failed})"
fi
if [ $RETVAL -eq 0 ]; then
success
else
failure
fi
echo
return $RETVAL
}
stop()
{
RETVAL=0
failed=""
listSeparator=""
failSeparator=""
echo -n "Stopping slapd trying: "
for serverID in $serverIDS; do
slapd="slapd-${serverID}"
echo -n "${listSeparator}${serverID}"
${fdsRoot}/${slapd}/stop-slapd > /dev/null 2>&1
slapdStatus=$?
# 0: Server stopped successfully
# 1: Server could not be stopped
# 2: Server was not running
if [ $slapdStatus = 0 ]; then
rm -f /var/lock/subsys/${slapd}
else
if [ $slapdStatus != 1 ]; then
rm -f /var/lock/subsys/${slapd}
fi
failed="${failed}${failSeparator}${serverID}(${slapdStatus})"
failSeparator=","
RETVAL=$slapdStatus
fi
listSeparator=","
done
if [ ! -z $failed ]; then
echo -n " (FAIL ${failed})"
fi
if [ $RETVAL -eq 0 ]; then
success
else
failure
fi
echo
return $RETVAL
}
restart()
{
stop
start
}
condrestart()
{
RETVAL=0
failed=""
listSeparator=""
failSeparator=""
echo -n "Restarting slapd trying: "
for serverID in $serverIDS; do
slapd="slapd-${serverID}"
if [ -f /var/lock/subsys/${slapd} ]; then
echo -n "${listSeparator}${serverID}"
${fdsRoot}/${slapd}/restart-slapd > /dev/null 2>&1
slapdStatus=$?
# 0: Server restarted successfully
# 1: Server could not be started
# 2: Server started successfully (was not running)
# 3: Server could not be stopped
if [ $slapdStatus = 0 ]; then
touch /var/lock/subsys/${slapd}
else
failed="${failed}${failSeparator}${serverID}(${slapdStatus})"
failSeparator=","
RETVAL=$slapdStatus
fi
listSeparator=","
fi
done
if [ ! -z $failed ]; then
echo -n " (FAIL ${failed})"
fi
if [ $RETVAL -eq 0 ]; then
success
else
failure
fi
echo
return $RETVAL
}
status()
{
# Note: there are two pid files in the slapd-*/logs directory a
# startpid file and a pid file. The startpid file is written when
# the server is attempting to initialize, this may take a long
# time. When the server is fully initialized and ready to receive
# connections the pid file is written. Thus there is the question
# of what constitutes running, initializing or ready? In this
# instance we decide to report a running state when the server is
# fully initalized and ready to serve clients.
# init.d status should return:
# 0 "$prog (pid $pid) is running..."
# 1 "$prog dead but pid file exists"
# 2 "$prog dead but subsys locked"
# 3 "$prog is stopped"
RETVAL=0
for serverID in $serverIDS; do
slapd="slapd-${serverID}"
pidFile=${fdsRoot}/${slapd}/logs/pid
if test -f $pidFile ; then
pid=`cat $pidFile`
if kill -0 $pid > /dev/null 2>&1 ; then
# slapd process $pid is running
echo "$slapd (pid $pid) is running..."
else
echo "$slapd dead but pid file exists"
if [ $RETVAL -eq 0 ]; then
RETVAL=1
fi
fi
else
if [ -f /var/lock/subsys/${slapd} ]; then
echo "$slapd dead but subsys locked"
if [ $RETVAL -eq 0 ]; then
RETVAL=2
fi
else
echo "$slapd is stopped"
if [ $RETVAL -eq 0 ]; then
RETVAL=3
fi
fi
fi
done
return $RETVAL
}
case "$1" in
start)
start
RETVAL=$?
;;
stop)
stop
RETVAL=$?
;;
reload|restart)
restart
RETVAL=$?
;;
condrestart)
condrestart
RETVAL=$?
;;
status)
status
RETVAL=$?
;;
*)
echo $"Usage: $myName {start|stop|restart|condrestart|status}"
RETVAL=3
esac
exit $RETVAL
***** the second script *****
cat /etc/init.d/fds-admin
#!/bin/sh
#
# fedora-ds-admin Start/Stop the fedora DS admin daemon.
#
# chkconfig: 2345 99 01
# description: Run LDAP Adminstration console
# Source function library.
. /etc/init.d/functions
myName=`basename $0`
# Source our configuration file for these variables.
FLAGS=
RETVAL=0
# Set up some common variables before we launch into what might be
# considered boilerplate by now.
path_start=/opt/fedora-ds/start-admin
path_restart=/opt/fedora-ds/restart-admin
path_stop=/opt/fedora-ds/stop-admin
path=./ns-httpd
prog="Fedora-DS Admin"
start() {
echo -n $"Starting $prog: "
daemon $path_start
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && touch /var/lock/subsys/$prog
return $RETVAL
}
stop() {
echo -n $"Stopping $prog: "
$path_stop
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$prog
return $RETVAL
}
restart() {
echo -n $"Restarting $prog: "
daemon $path_restart
RETVAL=$?
echo
[ $RETVAL -eq 0 ] && touch /var/lock/subsys/$prog
return $RETVAL
}
case "$1" in
start)
start
;;
stop)
stop
;;
restart)
restart
;;
status)
status $path
;;
condrestart)
[ -f /var/lock/subsys/$prog ] && restart || :
;;
*)
echo $"Usage: $0 {start|stop|status|reload|restart|condrestart}"
exit 1
esac
exit $?
