I found a workaround but I will file this away for any future rebuilds as something to try. I ended up going back to FC4 to install, which google told me would work, and then doing a direct FC4->FC6 upgrade via yum. I'm going to let the machine run for a couple of days and check for any errors just to make sure that nothing is jacked up. I'm pretty sure (ok 99.9%) that its a controller issue as when I disabled the controller the install proceeded fine up until It couldn't find any HD's. Can you just do a noXXX where XXX is any module you dont want loaded or is there a specific list? I have been pretty lucky during installs to not have any issues so I'm not all that familiar with what options are available. If you have a good link to read about this it would be welcome. Thanks for the information. Larry Dario Lesca wrote: > Il giorno dom, 25/02/2007 alle 13.57 -0500, Larry ha scritto: >> Trying to get a FC6 install on a DL320 G2. >> >> I get past the check media fine, then the problems start >> The system is just hanging when trying to bring up the GUI installer OR >> the text "gui" >> If I go the standard install method then I get the cursor, but nothing else. >> If I try text, I get a blue background but never any text or options. >> >> I have tried >> acpi=off apm=off, nofb,i8042.nomux, resolution=800x600(and 640x480 and >> 1024x768) > > try 'nodmraid' option. >
