Re: FC6: No display on screen; Savage Video Card: Solved

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi List,
I manage to resolve this issue. I don't know how! what I did is reinstalled FC6 with Feodra Extras selected. I think there is some update on Savage driver in Fedora Extras.
Cheers!
Thanks and best regards,
Rajesh


----- Original Message -----
From: rajesh.padalia@xxxxxxxxxxxx
Date: Friday, January 5, 2007 10:22 am
Subject: FC6: No display on screen; Savage Video Card

> Hi List,
> 
> I just installed FC6 on my old computer. everything was fine until 
> I rebooted computer. I did install in graphic mode. My S3 Savage4 
> video card (32MB RAM) and Benq FP767-12 LCD Monitor were correctly 
> identified. However on boot display is going blank.
> 
> I tried Xorg -configure, which generated attached file, however 
> did not resolve issue. 
> Attached below are Xorg.conf and Xorg.0.log: (last few lines).
> Please let me know if any one wnat to see full log file.
> I would appreciate help from list.
> 
> Thanks...
> 
> Rajesh
> ====================================
> xorg.conf:
> ----------
> Section "ServerLayout"
> 	Identifier     "X.org Configured"
> 	Screen      0  "Screen0" 0 0
> 	InputDevice    "Mouse0" "CorePointer"
> 	InputDevice    "Keyboard0" "CoreKeyboard"
> EndSection
> 
> Section "Files"
> 	RgbPath      "/usr/share/X11/rgb"
> 	ModulePath   "/usr/lib/xorg/modules"
> 	FontPath     "unix/:7100"
> 	FontPath     "built-ins"
> EndSection
> 
> Section "Module"
> 	Load  "vnc"
> 	Load  "record"
> 	Load  "dbe"
> 	Load  "glx"
> 	Load  "xtrap"
> 	Load  "dri"
> 	Load  "extmod"
> EndSection
> 
> Section "InputDevice"
> 	Identifier  "Keyboard0"
> 	Driver      "kbd"
> EndSection
> 
> Section "InputDevice"
> 	Identifier  "Mouse0"
> 	Driver      "mouse"
> 	Option            "Protocol" "auto"
> 	Option            "Device" "/dev/input/mice"
> 	Option            "ZAxisMapping" "4 5 6 7"
> EndSection
> 
> Section "Monitor"
> 	#DisplaySize          340   270	# mm
> 	Identifier   "Monitor0"
> 	VendorName   "BNQ"
> 	ModelName    "BenQ FP767-12"
> ### Comment all HorizSync and VertSync values to use DDC:
> 	HorizSync    31.0 - 83.0
> 	VertRefresh  56.0 - 76.0
> 	Option            "DPMS"
> EndSection
> 
> Section "Device"
>        ### Available Driver options are:-
>        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>        ### [arg]: arg optional
>        #Option     "NoAccel"            	# [<bool>]
>        #Option     "HWCursor"           	# [<bool>]
>        #Option     "SWCursor"           	# [<bool>]
>        #Option     "ShadowFB"           	# [<bool>]
>        #Option     "Rotate"             	# [<str>]
>        #Option     "UseBIOS"            	# [<bool>]
>        #Option     "LCDClock"           	# <freq>
>        #Option     "ShadowStatus"       	# [<bool>]
>        #Option     "CrtOnly"            	# [<bool>]
>        #Option     "TvOn"               	# [<bool>]
>        #Option     "PAL"                	# [<bool>]
>        #Option     "ForceInit"          	# [<bool>]
>        #Option     "Overlay"            	# [<str>]
>        #Option     "TransparencyKey"    	# [<str>]
>        #Option     "ForceInit"          	# [<bool>]
>        #Option     "DisableXVMC"        	# [<bool>]
>        #Option     "DisableTile"        	# [<bool>]
>        #Option     "DisableCOB"         	# [<bool>]
>        #Option     "DRI"                	# [<bool>]
>        #Option     "BCIforXv"           	# [<bool>]
>        #Option     "DVI"                	# [<bool>]
>        #Option     "BusType"            	# [<str>]
>        #Option     "DmaType"            	# [<str>]
>        #Option     "DmaMode"            	# [<str>]
>        #Option     "AGPMode"            	# <i>
>        #Option     "AGPSize"            	# <i>
> 	Identifier  "Card0"
> 	Driver      "savage"
> 	VendorName  "S3 Inc."
> 	BoardName   "Savage 4"
> 	BusID       "PCI:1:0:0"
> EndSection
> 
> Section "Screen"
> 	Identifier "Screen0"
> 	Device     "Card0"
> 	Monitor    "Monitor0"
> 	SubSection "Display"
>        	Viewport   0 0
>        	Depth     1
> 	EndSubSection
> 	SubSection "Display"
>        	Viewport   0 0
>        	Depth     4
> 	EndSubSection
> 	SubSection "Display"
>        	Viewport   0 0
>        	Depth     8
> 	EndSubSection
> 	SubSection "Display"
>        	Viewport   0 0
>        	Depth     15
> 	EndSubSection
> 	SubSection "Display"
>        	Viewport   0 0
>        	Depth     16
> 	EndSubSection
> 	SubSection "Display"
>        	Viewport   0 0
>        	Depth     24
> 	EndSubSection
> EndSection
> ====================================
> Xorg.0.log: (last few lines)
> -----------------------------
> 
> (**) Keyboard0: CustomKeycodes disabled
> (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
> (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
> (--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
> (II) Mouse0: ps2EnableDataReporting: succeeded
> (II) SAVAGE(0): [drm] removed 1 reserved context for kernel
> (II) SAVAGE(0): [drm] unmapping 8192 bytes of SAREA 0xcfc4c000 at 
> 0xb7f67000FreeFontPath: FPE "unix/:7100" refcount is 2, should be 
> 1; fixing.
> 
> 
> 
> -- 
> fedora-list mailing list
> fedora-list@xxxxxxxxxx
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
> 


[Index of Archives]     [Current Fedora Users]     [Fedora Desktop]     [Fedora SELinux]     [Yosemite News]     [Yosemite Photos]     [KDE Users]     [Fedora Tools]     [Fedora Docs]

  Powered by Linux