On Thu, December 14, 2006 00:36, Juan Antonio Caballero Molina wrote: >> From: "Manuel Arostegui" <manuel@xxxxxxxxxxxxxx> >> Subject: Re: Card Network Problem >> To: "For users of Fedora" <fedora-list@xxxxxxxxxx> >> Message-ID: >> <1149.87.217.45.106.1165923619.squirrel@xxxxxxxxxxxxxxxxxxxxxx> >> Content-Type: text/plain;charset=iso-8859-1 >> >> >> On Tue, December 12, 2006 12:40, ma1camoj@xxxxxx wrote: >> >>> I apologize if the question is a old post. >>> My question: >>> After a new FC6 installation, the network card not operate >>> Why verification I do: >>> 1) Network Configuration ==>Activate >>> system-config-network Message ==> e100 device eth0 does not seem to be present, delaying >>> initialization 2) gedit /etc/modprobe.conf ====> alias eth0 e100 3) ifconfig eth0up ====> >>> eth0: unknown interface: No such device >>> 4) lsmod ====> Module Size Used by ..... e100 40393 0 ... >>> >>> >>> >>> I appreciate any help. >>> Juan Antonio. >>> >> >> Have you look at lspcis output? Is your card there? >> >> >> What ifconfig -a shows? >> >> >> Kind regards. >> Manuel >> > > Dear Manuel, > Many thank and sorry for the late post-reply. > I think the card is pluged, because: > lspci ====> 00:0 ... Ethernet Controller Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev08) > Saludos, > Juan Antonio. > What about ifconfig? Try also dmesg | grep -i eth All the best. Manuel
