> From: "Manuel Arostegui" <manuel@xxxxxxxxxxxxxx> > Subject: Re: Card Network Problem > To: "For users of Fedora" <fedora-list@xxxxxxxxxx> > Message-ID: > <1149.87.217.45.106.1165923619.squirrel@xxxxxxxxxxxxxxxxxxxxxx> > Content-Type: text/plain;charset=iso-8859-1 > > On Tue, December 12, 2006 12:40, ma1camoj@xxxxxx wrote: > > I apologize if the question is a old post. > > My question: > > After a new FC6 installation, the network card not operate > > Why verification I do: > > 1) Network Configuration ==>Activate > > system-config-network Message ==> e100 device eth0 does not seem to be present, delaying > > initialization 2) gedit /etc/modprobe.conf ====> alias eth0 e100 > > 3) ifconfig eth0up ====> eth0: unknown interface: No such device > > 4) lsmod ====> Module Size Used by ..... e100 40393 0 ... > > > > > > I appreciate any help. > > Juan Antonio. > > Have you look at lspcis output? Is your card there? > > What ifconfig -a shows? > > Kind regards. > Manuel Dear Manuel, Many thank and sorry for the late post-reply. I think the card is pluged, because: lspci ====> 00:0 ... Ethernet Controller Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev08) Saludos, Juan Antonio.
