On Wed, 13 Dec 2006 18:30:08 +0100, Dale Bohl <DBohl@xxxxxxxxxxxxx> wrote:
Hello,
Does anyone have a fix for this?
I'm attempting to install FC6 on a SuperMicro using an Adaptec 2010s
ZC Raid controller.
I've configured the system disks as raid 1 and the other 4 disks as raid
5 using adaptec's
firmware.
When I try to install FC6 anaconda comes back and says "No Drives
Found"
I've upgraded the system BIOS and the 2010s BIOS but I get the same
thing.
-----------------------------------------
Dale Bohl - Senior Systems Administrator
Information Systems
Mason Companies, Inc.
dbohl@xxxxxxxxxxxxx
715-720-4382
Hi dale,
I had the same problem with CENTOS and I had to get the driver dpt_i2o.
Normally it is a card with 2 parts on it, 2010S and a part that uses the
driver aic79xx, on which you connect p.e. the tape-drive. Connecting a
tape on it will get you into trouble. So I disabled that part in the Bios.
I do not remember anymore how I did this all, because I wan't to forget
about this card, it is a nightmare.
If you google then you will find something about it.
My lsmod gives me at the end:
aic7xxx 146425 0
dm_snapshot 20837 0
dm_zero 6337 0
dm_mirror 28449 0
ext3 118729 2
jbd 59481 1 ext3
dm_mod 58949 6 dm_snapshot,dm_zero,dm_mirror
i2o_block 16717 3
i2o_core 42077 1 i2o_block
sd_mod 20545 0
scsi_mod 116429 3 st,aic7xxx,sd_mod
Good luck
--
Roland Brouwers
C.A.T. bvba
zevenbergenlaan 16
B-2660 Antwerpen
Tel: +32 3 830 3305
Mob: +32 475 443105
