I'm not using that, this was due to an issue with the system v interfaces (from some time back). No printers appear there, all were defined solely using the web interface, ok, guess I just need to go back and use the web interface to redefine them then? -----Original Message----- From: fedora-list-bounces@xxxxxxxxxx [mailto:fedora-list-bounces@xxxxxxxxxx] On Behalf Of Tim Waugh Sent: 17 November 2006 13:50 To: For users of Fedora Subject: RE: cups issues with OutputBin postscript option On Fri, 2006-11-17 at 11:55 +0000, Steve Hanselman wrote: > Sorry, should have posted that, FC5 with cups 1.2.5 (from the tcpdump) If you edited the PPD settings using the CUPS web interface (http://localhost:631/), those settings will have been overwritten by those stored by system-config-printer when any of the printing packages were updated. Do you see the option when you run system-config-printer? It should be in the 'Printer options' tab. Does it have the right setting? Thanks, Tim. */ The information contained in this email is intended for the personal and confidential use of the addressee only. It may also be privileged information. If you are not the intended recipient then you are hereby notified that you have received this document in error and that any review, distribution or copying of this document is strictly prohibited. If you have received this communication in error, please notify Brendata immediately on: +44 (0)1268 466100, or email 'technical@xxxxxxxxxxxxxx' Brendata (UK) Ltd Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX UK Registered Office as above. Registered in England No. 2764339 See our current vacancies at www.brendata.co.uk
