Answers and more questions and a few thoughts embedded...
Ric Moore <wayward4now@xxxxxxxxx> wrote:
I had this thing working as of yesterday, I rebooted and it's doing
the very same thing again. Only this time there is no mistake with a
comma versus a period.
Does anyone recognize this??
root@iam etc]# rc.d/init.d/network start Bringing up loopback
interface: [ OK ]
Bringing up interface eth0: RTNETLINK answers: Invalid argument
What is really strange is this...
[root@iam etc]# more hosts
# Do not remove the following line, or various programs # that require
network functionality will fail.
127.0.0.1 localhost.localdomain localhost iam
70.145.234.214 iam.wayward4now.net wayward4now.net
Which system is your DHCP server? The DSL modem, a different local box
or something at your ISP? Which system is iam.wayward4now.net? Is that
the box you're trying to get configured? 70.145.234.214 is a routeable
IP address but your internal network is 192.168.1.0/24. Where did this
setting come from? Is the DSL modem also supposed to function as a
router? The hosts file should NOT contain an entry for the system
itself other than the loopback.
Notice the alias iam on the localhost line? WTF? Since when would
anything get added other than localhost.localdomain and localhost?
I've edited that sucker out a dozen times, and it pops back up. This
is pretty crucial as I have people from www.prisontalk.com "coming in
to visit today" after church... at least I don't have to dress or put
on clothes. Up again until 5AM, this is really old. Ubuntu is starting
to look good to me.
Now I'm back in DHCP mode with the DSL modem and still get
Error while performing operation.
Host lookup failed: smtp.googlemail.com: Temporary failure in name
resolution
This just means your network is down. It will "go away" when you get
everything working. It occurs when the name server on your box can't
get any answer as opposed to getting a NXDOMAIN for a query.
It's slow as hell, too. Something somewhere having something to do
with named I'm guessing. Was that BIND issue resolved?? ls this
helpful? From messages: note: I'm in DHCP mode and STILL getting
errors resolving!
More fall-out from the above. When named asks a question, it waits a
while for an answer. It expects to get an answer of either an IP
address or a NXDOMAIN. If it gets neither, it waits for a rather long
time before timing out.
Sep 24 09:06:51 iam ntpd[1919]: sendto(192.168.1.254): Invalid
argument <----- that's the DSL modem,
Sep 24 09:23:56 iam last message repeated 3 times
Sep 24 09:24:04 iam last message repeated 2 times
Sep 24 09:37:34 iam named[1644]: unexpected RCODE (SERVFAIL) resolving
'oasc0400 8.247realmedia.com/AAAA/IN': 192.168.1.254#53
Sep 24 09:37:45 iam named[1644]: lame server resolving
'oasc04a.247realmedia.com ' (in 'oasc04a.247realmedia.com'?):
64.191.219.251#53
Sep 24 09:37:45 iam named[1644]: lame server resolving
'oasc04a.247realmedia.com ' (in 'oasc04a.247realmedia.com'?):
64.58.81.251#53
Looks like your name server is having problems.
Sep 24 09:37:57 iam named[1644]: unexpected RCODE (SERVFAIL) resolving
'oasc04a. 247realmedia.com/AAAA/IN': 192.168.1.254#53
More name server problems. Which box is your name server?
Sep 24 09:41:00 iam ntpd[1919]: sendto(192.168.1.254): Invalid argument
Sep 24 09:41:07 iam last message repeated 2 times
Sep 24 09:43:14 iam named[1644]: unexpected RCODE (SERVFAIL) resolving
'97.1.168 .192.in-addr.arpa/PTR/IN': 192.168.1.254#53
This looks like iam is attempting to get a host name for 192.168.1.97
from the nameserver on the DSL modem 192.168.1.254. Is this what's
supposed to happen?
Sep 24 09:58:04 iam ntpd[1919]: sendto(192.168.1.254): Invalid argument
Is your DSL modem also set up to be your ntp server?
Sep 24 09:58:10 iam last message repeated 2 times
Sep 24 10:05:50 iam ntpd[1919]: can't open /var/lib/ntp/drift.TEMP:
Permission denied
You've also got some permission problems for ntp on this box. Check the
permissions for /var/lib/ntp/drift.TEMP.
Sep 24 10:15:10 iam ntpd[1919]: sendto(192.168.1.254): Invalid argument
Sep 24 10:32:15 iam last message repeated 3 times
when I type route is stalls a bit then I get this:
Kernel IP routing table Destination Gateway Genmask Flags Metric Ref
Use Iface
192.168.1.0 * 255.255.255.0 U 0 0 0 eth0
169.254.0.0 * 255.255.0.0 U 0 0 0 eth0 default
I had to look this one up quite a while ago. It makes Linux routing
compatible with a Microsoftism. Our dear friends in Redmond use
169.254.0.0 for networking If you run absolutely no Microsoft junk, you
can safely remove it. Even samba wants it to be there though.
192.168.1.254 0.0.0.0 UG 0 0 0 eth0
Try doing "route -n" until you get your nameserver problems resolved.
By default, route attempts to resolve IP addresses to names. If named
is screwed up, it will have to wait while named times out.
in DHCP mode.
God, I need my static IP back! I've never has this array of problems
before. I don't recognize 169.254.0.0 either. If anyone thinks they
really know, and has free LD call me at 336-333-9311. I'm supposed to
be getting up with newsweek, as they might do an article on OAR
(fringe uses of computing!!) and this looks REALLY bad. Please God, no
more commas. I'm begging here. <chuckles> Ric
Don't have free long distance so this is the best I can do. Sorry if
you've already answered some of these questions before. A description
of how your network is supposed to work would be really helpful
including which box does routing, which does DHCP, nameserver, etc.
Cheers,
Dave
--
Politics, n. Strife of interests masquerading as a contest of principles.
-- Ambrose Bierce
