Jack Gates wrote: > > Here is my part of my trouble. > > This came from: > > http://www.owlfish.com/thoughts/winipp-cups-2003-07-20.html > > by way of Erich Carlson > > But I don't understand the info, just like when some one tells in one > form or another to RTFM, I have but it did not make any since. I > often times need to have something explained through an example that > I can get my head around. I salute those of you who have learned > difficult stuff at an older age. > <--------------------[ SNIP ]-------------------> > > I have no idea if I am configuring the correct files on FC5 or if I am > putting the correct information in the correct format on Win XP. > > I am certain that there is a correct simple way to do this networking > stuff. I just have no idea what it is. > > This is where I am in my understanding. > > I am in a room with no reference of which way is up and no gravity. > So am I right side up or up side down? I have no idea! > > There is a lot of information about networking and identifying > machines on the network but I have no understanding about what a > correct configuration looks like especially with what I am trying to > do now. Any changes that I try to do don't seem to work even though > it looks like I am doing what I am supposed to do. Do any of you > know what I am trying to ask because I sure don't. Will some one > please tell me which way is up? > Part of the problem is that there are 2 different ways to look up machine names. The machine has its DNS name (hostname). This is tied to an IP address. The /etc/hosts file on Linux and the \WINDOWS\system32\drivers\hosts file under Windows let you set up static hostname/IP mapping. This is the name used by things like web browsers. It is also used if you use UNIX print services under Windows. You would put the hostname you want to use for your Linux box in the hosts file on the Windows machine, along with its IP address. (This requires that your Linux machine have a fixed IP address.) You would normally use the same hostname as you have set on the Linux machine... For example, if your Linux machine is called server.localnet, and has an IP address of 192.168.1.5, you would have an entry like this: 192.168.1.5 server.localnet If you are running Samba, and/or Windows file sharing, then your machine has another name. This is the netbiosname of the machine. It is probably not the same as the hostname. It is used for Windows file/print sharing. On the Linux machine, it is set in /etc/samba/smb.conf. On the Windows machine, it is set as part of the network setup. The machines normally identify themselves to other machines on the network. Samba uses netbios over TCP/IP, so there is a mapping between the netbios name and IP address. This can ether be done by running a netbios name server, or by entries in the lmhosts files. Under Windows, this is in the same directory as the hosts file. There is a sample one called lmhosts.sam included. Under Linux, if is in the /etc/samba directory. For your Linux server, you might have an entry like this. (Using a netbios name of server.) 192.168.1.5 server For a small network with fixed IP addresses, the hosts and lmhosts files work fairly well. For larger networks, you are better off running your own name server, and setting up Samba to become the "master browser" for Windows networking. Mikkel -- Do not meddle in the affairs of dragons, for thou art crunchy and taste good with Ketchup!
