On Mon, 2006-07-17 at 13:16 -0700, Rick Stevens wrote: [snip] > Ok, so tg3 is now the official Broadcom driver (grumble!). Still, try > turning off the autonegotiation bit and see if it helps. Using ethtool: > > # ethtool -s ethX autoneg off speed 100 duplex full > > Obviously, use your ethernet port for "ethX" and set the "speed" > parameter to whatever you need (10, 100, or 1000). > > One of the complaints I have with the tg3 driver is that you have to use > ethtool to do this rather than stuffing parms into the modprobe.conf > file. Thanks, will give that a try. Regards, Patrick
