Don Maxwell wrote: > It appears that my current motherboard is flaking out on me. It is 6 > yrs old so I got my money's worth out of it for sure! > > What is the prevailing thought on replacing a MB in an existing system? > > I really want to preserve what I can in terms of applications and > configurations. Obviously, all the I/O will be different. Video, > audio, and LAN concerns do give me pause. > > The PC has two hard disks: One 30 GB where most everything resides > and one 80GB which is my /home partition. > > The options seem to be: > 1) Pop the new MB in and hope that Kudzu figures everything out > 2) Reinstall FC5 over my existing setup > 3) Blow away everything on my 30 GB disk and start mostly from > scratch, using my various backed up .conf files? > > Thanks! > --Don > As long as you are running a stock kernel, and using the same or an upgraded CPU, I would change the MB, boot into run level 3, and let Kudzu figure it out. In the past, I have had good luck with this. You will probably have to run the X configuration tool before you can boot into run level 5. (I am lazy - I run setup and pick the correct setup option.) Depending on the old and new CPU's, you may want to change the kernel and libc to make full use of the new CPU. One thing to keep in mind - if option 1 does not work, you can always proceed to step 2, and then step 3. Step one will not take long to do, and is worth it as a learning experience to see just how well Linux does handle hardware changes. My experience has been that, with the exception of your X configuration, it handles it very well, as long as you are not downgrading CPU's. I have not tried to let Kudzu handle changing the X configuration in a while, so that may even work now. Mikkel -- Do not meddle in the affairs of dragons, for thou art crunchy and taste good with Ketchup!
