First, please turn off HTML in your email. It looks like hell and makes things hard to read. Thank you. I take it this is a new installation. I have a Lenovo, but the installations should be similar. http://www.charlescurley.com/Lenovo.R51.html On Mon, Jun 26, 2006 at 10:48:34PM +0100, Paul Ward wrote: > > Hi, > I am currently using a compaq nx7010 laptop with FC5. I seem to be having > trouble with the wirless configuration. > I have a ipw2200 card built in, I have used livna to install the latest > drivers but can not get fedora to use it can someone please help. > ipw2200-firmware-3.0-1.lvn5 This is a firmware package, not a driver. You need both. > kernel2.6.17-1.2139_FC5 > ifcfg-eth1 > # Intel Corp.|PRO/Wireless LAN 2200 3B Mini PCI Adapter > DEVICE=eth1 > ONBOOT=yes > BOOTPROTO=dhcp > MODE=Managed > ESSID=HOME-NET > #lspci |grep ipw > I get nothing back Normal. Try instead: [root@dragon rpms]# lspci | grep 2200 02:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05) > #rmmod ipw2100 > again nothing back Reasonable, as it shouldn't be installed to start with. > #modprobe ipw2200 > nothing Normal. Unix tools are normally silent on success so that only error messages get displayed. > #cat /var/log/dmesg |grep ipw > ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 > ipw2100: Copyright(c) 2003-2006 Intel Corporation > ipw2100: Detected Intel PRO/Wireless 2100 Network Connection > ipw2100: eth0: Firmware 'ipw2100-1.3.fw' not available or load failed. > ipw2100: eth0: ipw2100_get_firmware failed: -2 > ipw2100: eth0: Failed to power on the adapter. > ipw2100: eth0: Failed to start the firmware. > ipw2100Error calling register_netdev. > ipw2100: probe of 0000:02:02.0 failed with error -5 If you have an ipw2200 and are installing the ipw2100 driver, something is wrong with your setup. I'd check /etc/modprobe.conf. You should have, inter alia: options ipw2200 hwcrypto=0 alias eth0 ipw2200 Also, this looks like the kernel is trying to attach the driver to eth0, when ifcfg-eth1 has it at eth1. Check ifcfg-eth0 just in case, but I suspect you're a victim of the demented driver dance others have seen, whereby the kernel swaps eth0 and eth1 around from time to time. This is what you want to see: [root@dragon ~]# dmesg | grep ipw2 ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.0.8 ipw2200: Copyright(c) 2003-2005 Intel Corporation ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection It will complain if it does not find the correct firmware, 2.4. > #ifup eth1 > ipw2100 device eth1 does not seem to be present, delaying initialization. > I have tried to rpm -qa | grep ipw > but only the ipw2200 driver shows up ??? The driver is part of the kernel, and should not have its own package. At least my driver does not. Or do you mean that you have the firmware package from livna? Have you checked to make sure the firmware version matches the one required by the driver? I'm lazy; I put all of the firmware files into the directory, and let the driver get the one it wants. Also, I see you are running kernel2.6.17-1.2139_FC5. Can you fall back to 2.6.16-1.2133_FC5 (the most recent from updates) and see if you still have this problem. If not, I would suspect a kernel problem. -- Charles Curley /"\ ASCII Ribbon Campaign Looking for fine software \ / Respect for open standards and/or writing? X No HTML/RTF in email http://www.charlescurley.com / \ No M$ Word docs in email Key fingerprint = CE5C 6645 A45A 64E4 94C0 809C FFF6 4C48 4ECD DFDB
Attachment:
pgpkXYflmK7sq.pgp
Description: PGP signature
