Sane did work with this equipment under FC-4 but of course I wiped
everything out when I installed FC-5. This morning I thought I'd like
to get the scanner working but my efforts have been to no avail. My
notes don't indicate any unique configuration under FC-4?
Some of the indications I am seeing are as follows:
scanimage -L
No scanners were identified.
sane-find-scanner
found USB scanner (vendor=0x03f0, product=0x0701) at libusb:001:002
# Your USB scanner was (probably) detected. It may or may not be
supported by
# SANE. Try scanimage -L and read the backend's manpage.
lsusb -v
Bus 001 Device 002: ID 03f0:0701 Hewlett-Packard ScanJet 5300c/5370c
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x03f0 Hewlett-Packard
idProduct 0x0701 ScanJet 5300c/5370c
bcdDevice 0.01
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
-------- snip -------
It appears that the computer recognizes the scanner but sane does not?
I don't know where to look next , what to do? Nothing I have found has
been of much help.
Suggestions appreciated.
Thanks.
Bob Goodwin Zuni, Virginia w2bod
